Darlington Array. NTE2088 Datasheet

NTE2088 Array. Datasheet pdf. Equivalent

Part NTE2088
Description Integrated Circuit 4-Segment Darlington Array
Feature NTE2088 Integrated Circuit 4–Segment Darlington Array, w/Pre–Driver Stage for use with PMOS and 12V .
Manufacture NTE
Datasheet
Download NTE2088 Datasheet




NTE2088
NTE2088
Integrated Circuit
4–Segment Darlington Array, w/Pre–Driver Stage
for use with PMOS and 12V CMOS
Description:
The NTE2088 is a High voltage, high current Darlington array in a 16–Lead DIP type package designed
as an interface between low–level logic and a variety of peripheral loads such as relays, solenoids, DC
and stepper motors, multiplexed LED and incandescent displays, heaters, and similar loads to 480
Watts (1.5A per output, 80V, 26% duty cycle).
This device has a minimum output breakdown of 50V and a minimum VCE(sus) of 35V measured at
100mA, or a minimum output breakdown of 80V and a minimum VCE(sus) of 50V.
A copper–alloy lead frame provides maximum power dissipation using standard cooling methods.
This lead configuration facilitates attachment of external heat sinks for increased power dissipation
with standard IC sockets and printed wiring boards.
Features:
D TTL, DTL, PMOS, CMOS Compatible Inputs
D Transient–Protected Outputs
D Loads to 480 Watts
D Heat Sink Contact Tabs on Quad Arrays
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Output Voltage, VCEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80V
Output Sustaining Voltage, VCE(sus) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50V
Output Current , IOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.75A
Input Voltage, VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V
Input Current (Note 1), IB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA
Supply Voltage, VS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V
Operating Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +85°C
Storage Temperature Range, TS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to –150°C
Note 1. Input current may be limited by maximum allowable input voltage.
Electrical Characteristics: (TA = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Output Leakage Current
Output Sustaining Voltage
ICEX
VCE(sus)
VCE = 80V
VCE = 80V, TA = +70°C
IC = 100mA, VIN = –400mV
Min Typ Max Unit
– – 100 µA
– – 500 µA
50 – – V



NTE2088
Electrical Characteristics (Contd): (TA = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
CollectorEmitter Saturation Voltage
Input Current
Input Voltage
Supply Current
TurnOn Delay
TurnOff Delay
Clamp Diode Leakage Current
Clamp Diode Forward Voltage
VCE(sat)
IIN(ON)
VIN(ON)
IS
tPLH
tPHL
IR
VF
IC = 500mA, VIN = 5V
IC = 750mA, VIN = 5V
IC = 1A, VIN = 5V
IC = 1.25A, VIN = 5V
IC = 1.5A, VIN = 5V
VIN = 5V
VIN = 12V
VCE = 2V, IC = 1.5A
IC = 500mA, VIN = 5V
0.5 EIN to 0.5 EOUT
0.5 EIN to 0.5 EOUT, IC = 1.25A
VR = 80V
VR = 80V, TA = +70°C
IF = 1A
IF = 1.5A
1.1 V
1.2 V
1.3 V
1.4 V
1.5 V
400 µA
1250 µA
5V
4.5 mA
1.0 µs
1.5 µs
50 µA
100 µA
1.75 V
2.0 V
Pin Connection Diagram
K1
C2
B3
GND 4
GND 5
B6
N.C. 7
C8
16 C
15 B
14 VS
13 GND
12 GND
11 B
10 C
9K







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)