Document
TENTATIVE
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PP100T060
POW-R-PAK 100A / 600V
TM
3 phase IGBT Assembly
Description: The Powerex POW-R-PAK is a configurable IGBT based power assembly that may be used as a converter, chopper, half or full bridge, or three phase inverter for motor control, power supply, UPS or other power conversion applications. The power assembly is mounted on a forced aircooled heatsink and features state-of-the-art Powerex F-series trench gate IGBTs with low conduction and switching losses for high efficiency operation. The TM POW-R-PAK includes a low inductance laminated bus structure, optically isolated gate drive interfaces, isolated gate drive power supplies, and a DC-link capacitor bank. The control board provides a simple user interface along with built-in protection features including overvoltage, undervoltage lockout, overcurrent, overtemperature, and short circuit detection. Depending on application characteristics the TM POW-R-PAK is suitable for operation with DC bus voltages up to 400VDC and switching frequencies above 20kHz. Schematic
TM
Features: High performance IGBT inverter bridge Integrated gate drive with fault monitoring & protection System status / troubleshooting LEDs to verify or monitor proper operation Isolated gate drive power supplies Low inductance laminated bus Output current measurement & feedback Superior short circuit detection & shoot through prevention
PP100T060(-)
-1-
TENTATIVE
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PP100T060
POW-R-PAK 100A / 600V
TM
3 phase IGBT Assembly
Absolute Maximum Ratings, Tj = 25°C unless otherwise specified
General IGBT Junction Temperature Storage Temperature Operating Temperature Voltage Applied to DC terminals Isolation Voltage, AC 1 minute, 60Hz sinusoidal IGBT Inverter Collector Current (TC = 25°C) Peak Collector Current (Tj < 150°C) Emitter Current Peak Emitter Current Maximum Collector Dissipation (Tj < 150°C) Gate Drive Board Unregulated +24V Power Supply Regulated +15V Power Supply PWM Signal Input Voltage Fault Output Supply Voltage Fault Output Current 30 18 20 30 50 Volts Volts Volts Volts mA IC ICM IE IEM Pc 100 200 100 200 350 Amperes Amperes Amperes Amperes Watts Symbol Tj Tstg Top VCC Viso -40 to +150 -40 to +125 -25 to +85 400 2500 Units °C °C °C Volts Volts
IGBT Inverter Electrical Characteristics, Tj = 25°C unless otherwise specified
Characteristics Collector Cutoff Current Collector – Emitter Saturation Voltage Emitter – Collector Voltage Symbol ICES VCE(sat) VEC td(on) Inductive Load Switching Times tr td(off) tf Diode Reverse Recovery Time Diode Reverse Recovery Charge DC Link Capacitance trr Qrr VCC = 300V IC = 100A VGE = 15V RG = 6.3Ω Test Conditions VCE = VCES, VGE = 0V IC = 100A, Tj = 25°C IC = 100A, Tj = 125°C IE = 100A Min Typ 1.6 1.6 1.9 18000 Max 1 2.2 2.6 100 80 300 250 150 Units mA Volts Volts Volts ns ns ns ns ns µC µF
PP100T060(-)
.