Document
PR2001 - PR2005
2.0A FAST RECOVERY RECTIFIER Features
· · · · · · Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 50A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0
A
B
A
D
C
Mechanical Data
· · · · · Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 0.4 grams (approx.)
Dim A B C D
DO-15 Min 25.40 5.50 0.686 2.60 Max ¾ 7.62 0.889 3.6
All Dimensions in mm
Maximum Ratings and Electrical Characteristics
Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 50°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Reverse Recovery Time (Note 3) Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range @ IF = 2.0A @ TA = 25°C @ TA = 100°C Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM trr Cj RqJA Tj, TSTG
@ TA = 25°C unless otherwise specified
PR 2001 50 35
PR 2002 100 70
PR 2003 200 140 2.0 50 1.2 5.0 100 150 35 50 -65 to +150
PR 2004 400 280
PR 2005 600 420
Unit V V A A V mA
250 15
ns pF K/W °C
Notes:
1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0 V DC. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5.
DS26010 Rev. A1-2
1 of 2
PR2001 - PR2005
I(AV), AVERAGE FWD RECTIFIED CURRENT (A)
2.0
10
1.6
IF, INSTANTANEOUS FWD CURRENT (A)
1.0
1.2
0.8
0.1
0.4
Single phase half-wave 60 Hz resistive or inductive load
0 25
0.01
125 150 175 200
Tj = 25°C Pulse width = 300µs
50
75
100
0.6
0.8
1.0
1.2
1.4
TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Derating Curve
VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics
IFSM, PEAK FORWARD SURGE CURRENT (A)
60
100
TA = 25°C f = 1.0MHz
Cj, CAPACITANCE (pF)
40
PR2002 - PR2004
PR2005
10
20
0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 100
1 1 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance
trr
50Ω NI (Non-inductive) Device Under Test 50V DC Approx 10Ω NI
100
+0.5A
(-)
Pulse Generator (Note 2)
(+) (-)
0A -0.25A
1.0Ω NI
Oscilloscope (Note 1)
(+)
Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω.
-1.0A Set time base for 50/100 ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
DS26010 Rev. A1-2
2 of 2
PR2001 - PR2005
.