Analog Switches. PS303 Datasheet

PS303 Switches. Datasheet pdf. Equivalent


Pericom Semiconductor Corporation PS303
PS301/PS302/PS3031122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122
Precision, Single-Supply
SPST Analog Switches
Features
Low On-Resistance (33typ) Minimizes Distortion and
Error Voltages
Low Glitching Reduces Step Errors in Sample-and-Holds.
Charge Injection, 2pC typ
Single-Supply Operation (+2.5V to +16V)
Improved Second Sources for MAX4501/MAX4502
On-Resistance Matching Between Channels, <2
On-Resistance Flatness, <6max
Low Off-Channel Leakage, <5nA @ +85oC
TTL/CMOS Logic Compatible
Fast Switching Speed, tON < 150ns
Guaranteed Break-Before-Make action (PS303 only)
eliminates momentary crosstalk
Rail-to-Rail Analog Signal Dynamic Range
Low Power Consumption, <5µW
MSOP Package minimizes board area
Applications
Audio, Video Switching and Routing
Portable Instruments
Data Acquisition Systems
Sample-and-Holds
Telecommunication Systems
Battery-Powered Systems
Description
The PS301/PS302/PS303 are improved high precision, medium
voltage analog switches designed to operate with single power
supplies. The PS301 is a single-pole single-throw (SPST), nor-
mally open (NO) switch. The PS302 has the same pinout as the
PS301 but is a normally closed (NC) switch. The PS303 has one
normally open (NO) and one normally closed (NC) switch per
package. Each switch conducts current equally well in either
direction when on. In the off state each switch blocks voltages up
to the power-supply rail.
With a +5V power supply, the PS301/PS302/PS303 guarantee
<60ON-resistance. ON-resistance matching between channels
is within 2. ON-resistance flatness is less than 6Ω over the
specified range. All three devices guarantee low leakage currents
(<100pA @ 25oC, <10nA @ +85oC) and fast switching speeds
(tON < 150ns). Break-before-make switching action protects
against momentary crosstalk (PS303).
For single-supply operation below 5V, the PI5A317/318/319
are also recommended.
Functional Diagrams, Pin Configurations, and Truth Tables
Top Views
COM 1
N.C. 2
N.C. 3
V+ 4
PS301
8 NO
7 GND
6 IN
5 N.C.
COM 1
N.C. 2
N.C. 3
V+ 4
PS302
8 NC
7 GND
6 IN
5 N.C.
NO 1
COM 2
NC 3
GND 4
PS303
8 V+
7 IN
6 N.C.
5 N.C.
PS301
Logic
Switch
0 OFF
1 ON
Switches shown for logic “0” input
PS302
Logic Switch
0 ON
1 OFF
Logic
0
1
PS303
NC
ON
OFF
NO
OFF
ON
For free samples and the latest literature: www.pericom.com, or phone 1-800-435-2336
1
PS8187A 06/29/99


PS303 Datasheet
Recommendation PS303 Datasheet
Part PS303
Description Precision / Single-Supply SPST Analog Switches
Feature PS303; 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234.
Manufacture Pericom Semiconductor Corporation
Datasheet
Download PS303 Datasheet




Pericom Semiconductor Corporation PS303
PS301/PS302/PS303
1234567890123456789012345678901212345678901234567890123456789012123456789012P34r56e7c8i9s01io23n45,6S78i9n01g2l1e23S45u67p89p0l1y23S45P67S89T012A34n56a7l8o90g12S12w34i5t6c7h89e0s12
Absolute Maximum Ratings
Thermal Information
Voltages Referenced to GND
V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +17V
VIN, VCOM, VNC, VNO (Note 1) . . . . . . . . . -2V to (V+) +2V
or 30mA, whichever occurs first
Current (any terminal) . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA
Peak Current, COM, NO, NC
(pulsed at 1ms, 10% duty cycle) . . . . . . . . . . . . . . . . . . 100mA
ESD per Method 3015.7 . . . . . . . . . . . . . . . . . . . . . . . >2000V
Continuous Power Dissipation
Plastic DIP (derate 6mW/ ºC above +70ºC) . . . . . . . . . 500mW
Narrow SO (derate 6mW/ ºC above +70ºC) . . . . . . . . 450mW
MSOP (derate 4mW/ ºC above +70ºC) . . . . . . . . . . . . 330mW
Storage Temperature . . . . . . . . . . . . . . . . . . -65ºC to +150ºC
Lead Temperature (soldering, 10s) . . . . . . . . . . . . . . . +300ºC
Note 1: Signals on NC, NO, COM, or IN exceeding V+ or
GND are clamped by internal diodes. Limit forward diode
current to 30mA maximum.
Caution: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating
and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied.
Electrical Specifications - Single +5V Supply (V+ = 5V +10%, GND = 0V, VINH = 2.4V, VINL = 0.8V)
Parameter
Symbol
Conditions
Temp. (°C) Min(2) Typ(1) Max(2) Units
Analog Switch
Analog Signal Range (3)
VANALOG
Full 0
V+ V
On Resistance
V+ = 4.5V,
RON VNO or VNC = +3.5V, ICOM = 1mA
25
Full
33 60
75
On-Resistance Match
Between Channels(4)
RON
VNO or VNC = +3V,
ICOM = 1mA, V+ = 5V
25
Full
0.8 2
4
On-Resistance Flatness(5)
RFLAT(ON)
V+ = 5V,
ICOM =1mA , VNO or VNC = 1V, 2V, 3V,
25
Full
26
8
NO or NC Off Leakage
Current(6)
INO(OFF) or
INC(OFF)
V+ = 5.5V, VCOM = 1V,
VNO or VNC = 4.5V
25 –0.1 –0.01 0.1
Full –5
5
COM Off Leakage Current(6) ICOM(OFF)
V+ = 5.5V,
VCOM = 4.5V, VNO or VNC = 1V
25 –0.1 –0.01 0.1 nA
Full –5
5
COM On Leakage Current(6) ICOM(ON)
Logic Input
V+ = 5.5V , VCOM = 5V,
VNO or VNC = 5V
25 –0.2 –0.04 0.2
Full –10
10
Input Current with Input
Voltage High
Input Current with Input
Voltage Low
IINH
IINL
VIN = 2.4V, all others = 0.8V
VIN = 0.8V, all others = 2.4V
Full –0.5 0.005 0.5
µA
–0.5 0.005 0.5
Logic High Input Voltage
Logic Low Input Voltage
VINH
VINL
2.4
V
0.8
2 PS8187A 06/29/99



Pericom Semiconductor Corporation PS303
PS301/PS302/PS303
11223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122P3344r5566e77c88i99s0011io2233n4455,66S7788i99n0011g22l11e2233S4455u6677p8899p00l11y2233S4455P6677S8899T001122A3344n5566a77l88o9900g1122S1122w3344i55t66c77h8899e00s1122
Electrical Specifications - Single +5V Supply (continued)
(V + = 5V ±10%, GND = 0V, VINH =2.4V, VINL = 0.8V)
Parameter
Symbol
Conditions
Dynamic
Turn-On Time
Turn-Off Time
Break-Before-Make
TimeDelay(3)
Charge Injection(3)
Off Isolation(7)
Crosstalk
NC or NO Off
Capacitance
COM Off Capacitance
tON
VNO or VNC = 3V, Figure 2
tOFF
tD
Q
OIRR
XTALK
C(OFF)
CCOM(OFF)
PS303 only, RL = 300, CL= 35pF, Fig. 3
CL= 1nF, VGEN = 0V, RGEN = 0, Fig. 4
RL = 50, CL= 5pF, f = 1MHz, Fig. 5
RL = 50, CL= 5pF, f = 1MHz, Fig. 6
f =1MHz, Figure 7
Temp. (°C) Min(1) Typ(2) Max(1) Units
25 85 150
Full 240
25 25 100 ns
Full 150
25
1 5 pC
–72
dB
25 –85
9
9 pF
COM On Capacitance
Supply
Power-Supply Range
Positive Supply Current
CCOM(ON)
V+
I+
f =1MHz, Figure 8
V+ = 5.5V, VIN = 0V or V+,
all channels on or off
22
2.7
Full
–1
16 V
1 µA
Notes:
1. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in
this data sheet.
2. Typical values are for DESIGN AID ONLY, not guaranteed or subject to production testing.
3. Guaranteed by design
4. RΟΝ = RΟΝ max. - RΟΝ min.
5. Flatness is defined as the difference between the maximum and minimum value of on-resistance measured.
6. Leakage parameters are 100% tested at maximum rated hot temperature and guaranteed by correlation at +25ºC.
7. Off Isolation = 20log10 [VCOM / (VNCor VNO)]. See Figure 5.
3 PS8187A 06/29/99







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)