HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps / TOTEM-POLE OUTPUT TYPE 5-PIN SOP TOM PHOTOCOUPLER
DATA SHEET
PHOTOCOUPLER
PS9711
HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE −NEPOC Series− 5-PIN SO...
Description
DATA SHEET
PHOTOCOUPLER
PS9711
HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE −NEPOC Series− 5-PIN SOP TOM PHOTOCOUPLER
TM
DESCRIPTION
The PS9711 is an optically coupled high-speed, totem-pole output isolator containing a GaAlAs LED on light emitting diode (input) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip.
FEATURES
High common mode transient immunity (CMH, CML = ±10 kV/µs TYP.) Small package (5-pin SOP) High-speed response (tPHL = 30 ns, tPLH = 35 ns TYP.) Pulse width distortion (tPHL – tPLH = 7 ns TYP.) Totem-pole output (No pull-up resistor required) Ordering number of taping product: PS9711-E3, E4: 900 pcs/reel, PS9711-F3, F4 (Recommended): 3 500 pcs/reel
APPLICATIONS
Computer and peripheral manufactures Measurement equipment PDP
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. P13103EJ3V0DS00 (3rd edition) Date Published February 2000 NS CP(K) Printed in Japan
The mark shows major revised points.
©
1997, 2000
PS9711
PACKAGE DIMENSIONS (in millimeters)
4.0±0.5
TOP VIEW
5 4 3 1. Anode 2. Cathode 3. GND 4. VO 5. VCC 1 2 7.0±0.3 4.4
2.1±0.2
0.15 +0.10 –0.05
0.1±0.1
1.27 0.4 +0.10 –0.05 0.25 M
0.5±0.3
INTERNAL OUT PUT CI...
Similar Datasheet