MIP2C2

( DataSheet : www.DataSheet4U.com ) r Undement p lo e Dev Saves power during standby, enhances efficiency MIP2C2 High-Performance IPD for Battery Chargers Unit : mm +0 0.25 -0.05 I Overview MIP2C2 is a high-performance IPD designed for 7W battery chargers. It features built-in protection circuits necessary for compact power source charger circuitry. This allows a significant reduction in externally connected parts. MIP2C2 provides PWM control when a normal load is applied and intermittent control with low load. This results in greater efficiency for very low to maximum loads, while also conserving power during standby. 9.4±0.3 8 7 5 7.62±0.25 3.4±0.3 3.8±0.25 6.3±0.2 1 2 3 4 2.54±0.25 I Features G Built-in charge protection circuit Built-in overcurrent, overheating, load shorting and overvoltage protection circuits G Significantly reduced power consumption with no load* 20mW at 100VAC, 25mW at 240VAC G High efficiency with rated load* 75% at 100VAC,72% at 240VAC G Reduced number of parts (12 less than conventional Panasonic models) * With worldwide input and 5.8V/0.7A output 0.5±0.1 1.2±0.25 (2,3,7PIN) 0.4±0.1 0.6±0.1 (1,4,5,8PIN) DIP8-A1(CF) I Applications G Chargers (for cellular phones, etc. ) I Block Diagram I Pin Descriptions Pin No. Function VDD FB CL VCC Drain  Source Source VCC VCC UV 12V 10V DRAIN Reg. 1 5.7V VDD VCC OVP 22V Overheat protection Oscillator Restart trigger 2 3 4 5 6 SOURCE S R Q Q VDD UV 5.7V 4.7V CL Max Duty Clock 15% 20%...