TinyLogic UHS 1-Bit Low Power Bus Switch
NC7SZD384 1-Bit Low Power Bus Switch with Level Shifting
June 1997 Revised December 2005
NC7SZD384 1-Bit Low Power Bus ...
Description
NC7SZD384 1-Bit Low Power Bus Switch with Level Shifting
June 1997 Revised December 2005
NC7SZD384 1-Bit Low Power Bus Switch with Level Shifting
General Description
The NC7SZD384 provides 1-bit of high-speed CMOS TTL-compatible bus switch. The low on resistance of the switch allows inputs to be connected to outputs with minimal propagation delay and without generating additional ground bounce noise. The device is organized as a 1-bit switch with a bus enable (OE) signal. When OE is LOW, the switch is on and Port A is connected to Port B. When OE is HIGH, the switch is open and a high-impedance state exists between the two ports. Reduced voltage drive to the gate of the FET switch permits nominal level shifting of 5V to 3.3V through the switch.
Features
O Space saving SOT23 or SC70 5-lead package ¥ O Ultra small MicroPak Pb-Free leadless package O 5: switch connection between two ports O Designed to be used in level-shifting applications O Minimal propagation delay through the switch O Low ICC O Zero bounce in flow-through mode O Control inputs compatible with TTL level
Ordering Code:
Order Number
NC7SZD384M5X NC7SZD384P5X NC7SZD384L6X
Package Number
MA05B MAA05A MAC06A
Product Code Top Mark
Package Description
8Z4D
5-Lead SOT23, JEDEC MO-178, 1.6mm
Z4D
5-Lead SC70, EIAJ SC-88a, 1.25mm Wide
A4
Pb-Free 6-Lead MicroPak, 1.0mm Wide
Supplied As
3k Units on Tape and Reel 3k Units on Tape and Reel 5k Units on Tape and Reel
Pb-Free package per JEDEC J-STD-020B.
Micr...
Similar Datasheet