NCS7101

NCS7101, NCV7101 1.8 Volt Rail-to-Rail Operational Amplifier The NCS7101 operational amplifier provides rail−to−rail operation on both the input and output. The output can swing within 50 mV of each rail. This rail−to−rail operation enables the user to make full use of the entire supply voltage range available. It is designed to work at very low supply voltages (1.8 V and ground), yet can operate with a supply of up to 10 V and ground. The NCS7101 is available in the space saving SOT−23−5 package with two industry standard pinouts. Features Low Voltage, Single Supply Operation (1.8 V and Ground to 10 V and Ground) 1.0 pA Input Bias Current Unity Gain Bandwidth of 1.0 MHz at 5.0 V, 0.9 MHz at 1.8 V Output Voltage Swings Within 50 mV of Both Rails @ 1.8 V No Phase Reversal on the Output for Over−Driven Input Signals Input Offset Trimmed to 1.0 mV Low Supply Current (ID = 1.0 mA) Works Down to Two Discharged NiCd Battery Cells ESD Protected Inputs Up to 2.0 kV These Devices are Pb−Free and are RoHS Compliant AEC−Q100 Qualified and PPAP Capable *NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements Typical Applications Dual NiCd/NiMH Cell Powered Systems Portable Communication Devices Low Voltage Active Filters Power Supply Monitor and Control Interface to DSP Rail to Rail Input Rail to Rail Output 1.8 V to 10 V + - This device contains 68 active transistors. Figure 1. Typical Application © ...