OCX160 Crosspoint Switch
OCX160 Crosspoint Switch
Features
• • • • 667 Mb/s port data bandwidth, >50Gb/s aggregate bandwidth Low power CMOS, 2.5V...
Description
OCX160 Crosspoint Switch
Features
667 Mb/s port data bandwidth, >50Gb/s aggregate bandwidth Low power CMOS, 2.5V and 3.3V power supply SRAM-based, in-system programmable 160 configurable I/O ports – 80 dedicated differential input ports – 80 dedicated differential output ports – Supports LVDS and LVPECL I/O – LVTTL control interface – Output Enable control for all outputs Non-blocking switch matrix – Patented ActiveArray™ matrix for superior performance – Double-buffered configuration RAM cells for simultaneous global updates – ImpliedDisconnect™ function for single cycle disconnect/ connect Full Broadcast and multicast capability – One-to-One and One-to-Many connections – Special broadcast mode routes one input to all outputs at maximum data rate Registered and flow-through data modes – 333 MHz synchronous mode – 667 Mb/s asynchronous mode – Low jitter and signal skew – Low duty cycle distortion RapidConfigure™ parallel interface for configuration and readback JTAG serial interface for configuration and Boundary Scan testing 420 BGA package with 1.27mm ball spacing
Preliminary Data Sheet
Description
The OCX™ family of SRAM-based devices are non-blocking n X n digital crosspoint switches capable of data rates of 667 Megabits per second per port. The I/O ports are fixed as either input or output ports. The input ports support flow-through mode only. The output ports are individually programmable to operate in either flowthrough (asynchronous) or registere...
Similar Datasheet