OES040ZG-A converter Datasheet

OES040ZG-A Datasheet, PDF, Equivalent


Part Number

OES040ZG-A

Description

Ultra-Dense 40W converter

Manufacture

Power-One

Total Page 3 Pages
Datasheet
Download OES040ZG-A Datasheet


OES040ZG-A
Powering Communications and Technology
OES SERIES
40 WATT
DESCRIPTION
OES DC/DC converters are ultra-dense, 40
Watt, single output converters produced for the
telecom and networking markets. Making use of
open-frame packaging, planar magnetics, high
efficiency topologies, and surface-mount design,
the OES has superior thermal performance.
The OES features 1500 VDC isolation and
overvoltage protection, as well as input
undervoltage lockout.
TECHNICAL SPECIFICATIONS
Voltage Range
48 VDC Nominal
Input Under Voltage Lockout
Input Undervoltage Hysteresis
Reflected Ripple
Input Reverse Voltage Protection
Input
36 - 72 VDC
<34V
1V Nominal
50 mA Pk-Pk
Shunt Diode
Output
Setpoint Accuracy
3.3/5.0 V Line Regulation Vin Min. - Vin Max., Iout Rated
2.5/2.1 V Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Minimum Output Current
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range
Short Circuit / Overcurrent Protection
Current Limit Threshold Range, % of Iout Rated
OVP Trip Range
Remote Shutdown Reference
±1%
0.2% Vout
0.4% Vout
0.5% Vout
10%, Iout Rated
25% Iout
6% Vout
500 µs
±10%
Shutdown / Hiccup
110 - 140%
120 - 140% Vout Nom.
Vin Negative
Notes
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
FEATURES
• Ultra-Dense 40W
converter
• Industry standard
package
• 100 °C baseplate
operation
• Open-Frame packaging
• 5, 3.3, 2.5, and
2.1V Outputs
• Remote Enable
Pin
• 1500V Isolation
• Input Pi Filter
Efficiency vs. Load (48V Input)
95
90
85
80
75
70
65 OES021ZC-A
60 OES025ZD-A
55 OES033ZE-A
50 OES040ZG-A
45
40
1 2 3 4 5 6 7 8 9 10
X10 = LOAD %
General
Turn-On Time
Remote Shutdown
Switching Frequency, 3.3V Output
Switching Frequency, 5.0, 2.5, 2.1V Outputs
Isolation
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
Thermal Shutdown Range
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Weight (Approx.)
10 ms
Positive Logic
400 kHz
300 kHz
1500 VDC
1050 VDC
500 VDC
±0.03%/°C
-40 To +100°C
-40 To +125°C
105 To 115°C
5 g, 10
2.5 X
1- 0565
Hz
hrs
UL, cUL, TUV
1.4 oz
1

OES040ZG-A
Powering Communications and Technology
MODELS - (See the last page of Section for options.)
Vin
(Volts)
Vin Range
(Volts)
Iin Max.*
(Amps)
Vout
(Volts)
48 36 - 72
0.77
2.1
48 36 - 72
0.87
2.5
48 36 - 72 1.12 3.3
48 36 - 72
1.31
5
* Maximum input current at minimum input voltage, maximum rated output power.
** At nominal Vin, rated output.
Iout Rated
(Amps)
10.00
10.00
10.00
8.00
MECHANICAL DRAWING
OES SERIES
40 WATT
Ripple & Noise
Pk-Pk (mV)
50
50
75
75
Efficiency
Typ. **
84%
81%
85%
89%
Model
OES021ZC-A
OES025ZD-A
OES033ZE-A
OES040ZG-A
Thermal Impedance
Natural Convection
100 LFM
200 LFM
300 LFM
400 LFM
11.3 C/W
8.9 C/W
6.2 C/W
4.4 C/W
3.4 C/W
Note:
Thermal impedance data is dependent on
many environmental factors. The exact
thermal performance should be validated
for specific application.
Pin Function
1 +Vin
2 -Vin
3 No Conn.
4 Enable
5 +Vout
6 -Vout
7 Trim
2
Tolerances
Inches:
.XX ± 0.020
.XXX ± 0.010
(Millimeters)
.X ± 0.5
.XX ± 0.25
Pin:
± 0.002
± 0.05
(Dimensions as listed unless otherwise specified.)


Features Powering Communications and Technology OES SERIES 40 WATT DESCRIPTION OES DC/D C converters are ultra-dense, 40 Watt, single output converters produced for t he telecom and networking markets. Maki ng use of open-frame packaging, planar magnetics, high efficiency topologies, and surface-mount design, the OES has s uperior thermal performance. The OES fe atures 1500 VDC isolation and overvolta ge protection, as well as input undervo ltage lockout. FEATURES TECHNICAL SPEC IFICATIONS Input Voltage Range 48 VDC N ominal Input Under Voltage Lockout Inpu t Undervoltage Hysteresis Reflected Rip ple Input Reverse Voltage Protection 36 - 72 VDC <34V 1V Nominal 50 mA Pk-Pk S hunt Diode • Ultra-Dense 40W convert er • Industry standard package • 10 0 °C baseplate operation • Open-Fram e packaging • 5, 3.3, 2.5, and 2.1V Outputs • Remote Enable Pin • 1500V Isolation • Input Pi Filter Efficie ncy vs. Load (48V Input) 95 Output Set point Accuracy 3.3/5.0 V Line Regulation Vin Min. - Vin Max., Iout Rated 2.5/2.1.
Keywords OES040ZG-A, datasheet, pdf, Power-One, Ultra-Dense, 40W, converter, ES040ZG-A, S040ZG-A, 040ZG-A, OES040ZG-, OES040ZG, OES040Z, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)