Dual/Quad Low Power / High Speed JFET Operational Amplifiers
a
FEATURES High Slew Rate: 9 V/ s Wide Bandwidth: 4 MHz Low Supply Current: 250 A/Amplifier Low Offset Voltage: 3 mV ...
Description
a
FEATURES High Slew Rate: 9 V/ s Wide Bandwidth: 4 MHz Low Supply Current: 250 A/Amplifier Low Offset Voltage: 3 mV Low Bias Current: 100 pA Fast Settling Time Common-Mode Range Includes V+ Unity Gain Stable APPLICATIONS Active Filters Fast Amplifiers Integrators Supply Current Monitoring
Dual/Quad Low Power, High Speed JFET Operational Amplifiers OP282/OP482
PIN CONNECTIONS 8-Lead Narrow-Body SOIC 8-Lead Epoxy DIP (S Suffix) (P Suffix)
OUT A 1 –IN A +IN A V– 2 3 4 8 V+ 7 OUT B OUT A 1 –IN A +IN A V– 2 3 4 OP-482 8 V+ 7 OUT B
OP282
OP282
6 –IN B 5 +IN B
6 –IN B 5 +IN B
14-Lead Epoxy DIP (P Suffix)
OUT A –IN A 1 2 3 4 5 6 7 14 OUT D 13 –IN D 12 +IN D
14-Lead Narrow-Body SOIC (S Suffix)
OUT A –IN A +IN A V+ +IN B –IN B OUT B 1 2 3 4 5 6 7 14 OUT B 13 12 –IN D +IN D V–
GENERAL DESCRIPTION
+IN A V+ +IN B –IN B OUT B
The OP282/OP482 dual and quad operational amplifiers feature excellent speed at exceptionally low supply currents. Slew rate exceeds 7 V/µs with supply current under 250 µA per amplifier. These unity gain stable amplifiers have a typical gain bandwidth of 4 MHz. The JFET input stage of the OP282/OP482 insures bias current is typically a few picoamps and below 500 pA over the full temperature range. Offset voltage is under 3 mV for the dual and under 4 mV for the quad. With a wide output swing, within 1.5 volts of each supply, low power consumption and high slew rate, the OP282/OP482 are ideal for battery-powered systems or power restricted applications. ...
Similar Datasheet