Document
Prod uct Bul le tin OP910 December 1998
PIN Silicon Photodiode
Type OP910
*THIS DIMENSION CONTROLLED AT HOUSING SURFACE. DIMENSIONS ARE IN INCHES (MILLIMETERS).
Features • • • •
Narrow receiving angle Fast switching time Linear response vs. irradiance Enhanced temperature range
Ab so lute Maxi mum Rat ings (TA = 25o C un less oth er wise noted)
Re verse Volt age . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 V Stor age Tem per ature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 o C to +150 o C Op er at ing Tem per ature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 o C to +125 o C Lead Sol der ing Tem per ature [1/16 inch (1.6 mm) from case for 5 sec . with sol der ing iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260o C(1) Power Dissaipa tion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mW
NOTES: (1) RMA Flux is rec om mended. Du ra tion can be ex tended to 10 sec. max. when flow sol der ing. (2) Light source is an un fil tered GaAIAs LED with a peak wave length of 885 nm and a radio met ric in ten sity level which var ies less than 10% over the en tire lens sur face of the pho to di ode being tested. (3) Junc tion tem pera ture main tained at 25o C. (4) To cal cu late typi cal dark cur rent in nA, use. The for mual ID = 10 (0.042 TAt-1.5) where TA is am bi ent tem pera ture in o C. (5) Der ate line arly 2.5 mw/o C above 25o C.
Description
The OP910 consists of a PIN silicon photodiode mounted in a two-leaded hermetic TO-46 package. The narrow receiving angle has an acceptance half angle of ±12o.
Typi cal Per form ance Curves
Typi cal Spec tral Re sponse
Wave length - nm
Optek Tech nol ogy, Inc.
1215 W. Crosby Road
Car roll ton, Texas 75006 3-70
(972)323- 2200
Fax (972)323-2396
Type OP910
Elec tri cal Char ac ter is tics (TA = 25 C un less oth er wise noted) SYM BOL
IL ID V(BR)R tr tf ∅ CP
o
PARAMETER
Light Current Dark Current Reverse Voltage Breakdown Rise Time Fall Time Half Angle Capacitance
MIN
10
TYP MAX UNITS
13 1 10 µA nA V 10 10 +/- 12 13 nS nS degr. pF
TEST CON DI TIONS
VR = 20 V, Ee = .50 mW/cm2 note 2,3 VR = 20 V, Ee = 0.0 IR = 100 µA VR = 20 V, RL = 50 OHMS VR = 20 V, R L = 50 OHMS IF = Constant VR = 0 V, F = 1 Mhz, Ee = 0
100
Typi cal Per form ance Curves
Normalized Light Current vs Reverse Voltage Total Capacitance vs Reverse Voltage Normalized Light and Dark Current vs Ambient Temperature VR = 5 V λ = 935 nm Normalized to TA = 25o C
TA = 25o C Ee = 0 mW/cm2 f = 1 MHz TA = 25o C λ = 935 nm
Light Current
Dark Current
TA - Ambient Temperature - o C VR - Reverse Voltage - V VR - Reverse Voltage - V
Light Current vs Irradiance
Switching Time Test Circuit
E e - Irradiance - mW/cm2
Op tek re serves the right to make changes at any time in or der to im prove de sign and to sup ply the best prod.