Low Power / Single-Supply OPERATIONAL AMPLIFIERS TM
®
OPA
631
OPA631 OPA632
For most current data sheet and other product information, visit www.burr-brown.com
Low Pow...
Description
®
OPA
631
OPA631 OPA632
For most current data sheet and other product information, visit www.burr-brown.com
Low Power, Single-Supply OPERATIONAL AMPLIFIERS
TM
FEATURES
q HIGH BANDWIDTH: 75MHz (G = +2) q LOW SUPPLY CURRENT: 6mA q ZERO POWER DISABLE (OPA632) q +3V AND +5V OPERATION q INPUT RANGE INCLUDES GROUND q 4.8V OUTPUT SWING ON +5V SUPPLY q HIGH SLEW RATE: 100V/µs q LOW INPUT VOLTAGE NOISE: 6nV/√HZ q AVAILABLE IN SOT23 PACKAGE
DESCRIPTION
The OPA631 and OPA632 are low power, high-speed, voltage-feedback amplifiers designed to operate on a single +3V or +5V supply. Operation on ±5V or +10V supplies is also supported. The input range extends below ground and to within 1V of the positive supply. Using complementary common-emitter outputs provides an output swing to within 30mV of ground and 130mV of the positive supply. The high output drive current and low differential gain and phase errors also make them ideal for single-supply consumer video products. Low distortion operation is ensured by the high gain bandwidth (68MHz) and slew rate (100V/µs), making the OPA631 and OPA632 ideal input buffer stages to 3V and 5V CMOS converters. Unlike other low power, single-supply amplifiers, distortion performance improves as the signal swing is decreased. A low 6nV input voltage noise supports wide dynamic range operation. Channel multiplexing or system power reduction can be achieved using the high speed disable line. Power dissipation can be reduced to zero by taking the disa...
Similar Datasheet