P-AT-6

Programmable Attenuators P-AT Series sFeatures 1. Used for frequencies from DC to 26.5GHz (max.) Input/output couplings utilizes Hirose’s HE* connector, which is combination of the internal attenuation elements, provides the required attenuation characteristic. 2. Self-disconnecting The drive current will automatically switch off after setting the attenuation. 3. Automatic return In the event of sudden shock the attenuation will quickly return to the pre-set level. sApplications Wide variety of measuring instruments and other devices requiring control of high frequency transmission lines. * HE connector will mate with K type connectors * K connector is a trademark of Anritsu Co. sProduct Specifications Ratings Frequency range DC~8GHz(P-AT-6,AP-AT-7) Operating temperate range Operating relative humidity DC~26.5GHz(P-AT-8) -10ç to +75ç(No freezing) 95% Max. Characteristic 1.Vibration 2.Shock Requirements No electrical discontinuity of 1 µs or more No damage, cracks, or parts dislocation Conditions Frequency of 10 to 55 Hz, overall amplitude of 1.5 mm for 2 hours in each of 3 directions Acceleration of 98 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis 3.Temperature cycle No damage, cracks, or parts dislocation qThe test method conforms to MIL-STD-202. sMaterials and Finishes Component Body Coupling connector body Female contact Material Aluminum Stainless steel Beryllium Copper Finish Conductive alumite Passivated Gold plating sOrdering Information P-A...