DatasheetsPDF.com

SAA-311100 Dataheets PDF



Part Number SAA-311100
Manufacturers Seiko Instruments Inc
Logo Seiko Instruments Inc
Description Single-Mode FC D-Shape ADAPTOR supplied
Datasheet SAA-311100 DatasheetSAA-311100 Datasheet (PDF)

DOCUMENT NUMBER NCD-4NC1-02 SAA-3 Series Single-Mode FC D-Shape ADAPTOR TECHNICAL SPECIFICATIONS Seiko Instruments Inc. Components Sales Dept. 8, Nakase 1-Chome Mihama-ku, Chiba-shi, Chiba-ken 261 JAPAN Telephone : 043-211-1214 -1215 Facsimile : 043-211-8035 SAA-3 Series Single-Mode FC D-Shape ADAPTOR TECHNICAL SPECIFICATIONS Document Number NCD-4NC1-02 First Edition Second Edition November December 1994 1995 Copyright 1994, 1995 by Seiko Instruments Inc. All right reserved. The information.

  SAA-311100   SAA-311100


Document
DOCUMENT NUMBER NCD-4NC1-02 SAA-3 Series Single-Mode FC D-Shape ADAPTOR TECHNICAL SPECIFICATIONS Seiko Instruments Inc. Components Sales Dept. 8, Nakase 1-Chome Mihama-ku, Chiba-shi, Chiba-ken 261 JAPAN Telephone : 043-211-1214 -1215 Facsimile : 043-211-8035 SAA-3 Series Single-Mode FC D-Shape ADAPTOR TECHNICAL SPECIFICATIONS Document Number NCD-4NC1-02 First Edition Second Edition November December 1994 1995 Copyright 1994, 1995 by Seiko Instruments Inc. All right reserved. The information contained herein shall not reproduced or disclosed to any third party without the express written consent of SII. The Specifications contained herein are subject to change without notice. SII is a trademark of Seiko Instruments Inc. Please address any questions, comments, and suggestions to: Seiko Instruments USA Inc. Electronics Components Division 2990 West Lomita Boulevard Torrance, CA 90505, U.S.A. Phone: 310-517-7780 Fax: 310-517-7792 Seiko Instruments GmbH OFC Division Siemensstraße 9b D-63263 Neu-Isenburg, Germany Phone: 06102-297-0 Fax: 06102-297-211 Seiko Instruments (H.K.) Ltd. Sales Department 4th & 5th Floor, Wyler Center 2 200 Tai Lin Pai Road, Kwai Chung N.T., Kowloon, Hong Kong Phone: 852-2421-8611 Fax: 852-2480-5479 Seiko Instruments Taiwan Inc. Sales Department 5F-1, No.99, Sec. 2, Chung Shan Rd. Taipei 104, Taiwan, R.O.C. Phone: 02-563-5001, 523-5111 Fax: 02-521-9519 Seiko Instruments Singapore 2, Marsiling Lane, Woodlands New Town, Singapore, 2573, Singapore Phone: 65-2691370 Fax: 65-2699729 pte. Ltd. ii TABLE OF CONTENTS Section 1. 1.1 2. 3. 3.1 3.2 3.3 3.4 4. 5. PROVISION Application Limit PARTS NUMBER GENERAL SPECIFICATIONS Parts and Materials Physical Dimensions General Tolerances Insertion Loss PACKING SHIPPING INSPECTION Table Page 1 1 1 2 2 2 2 3 3 3 Table 1 Table 2 Table 3 Table 4 Parts Number Parts and Materials General Tolerance Insertion Loss and the Measurement Conditions 1 2 2 3 Figure Figure 1 Figure 2 Figure 3 to 6 Insertion Loss Measurement System SAA-3 Adaptor Part Dimensions 3 4 5 iii iv 1. PROVISION 1.1 Application Limit These specifications apply to the SAA-3 Single-Mode FC D-Shape ADAPTOR supplied by SII. 2. PARTS NUMBER Parts Number of the Adaptor is Shown in Table 1. Table 1 Parts Number 1 3. GENERAL SPECIFICATIONS 3.1 Parts and Materials Parts and the materials are shown in Table 2. Table 2 Parts and materials No. Part Name Housing Sleeve Fitting Sleeve Slit Sleeve Washerr Nut Cap Q'ty 1 1 1 1 1 1 2 Brass Brass Brass Phosphor Bronze Zirconia Ceramics Stainless Steel Brass Plastic Synthetic Rubber Nickel Plating White Red - Material Nickel Plating Nickel Plating Nickel Plating - Notes x y Ž  -1  -2 | ‘ ~ -1 ~ -2 3.2 Physical Dimensions Figure 2 shows the SAA-3. Figure 3 to 6 show the part dimension. 3.3 General Tolerances Permissible deviation in dimensions without tolerance indication is in accordance with JIS B 0405 class m, as shown in Table 3. Table 3 General tolerance (JIS B 0405 class m) Basic size step (mm) Over Under 0.5 3 6 30 3 6 30 120 Permissible deviation (mm) ± 0.1 ± 0.1 ± 0.2 ± 0.3 2 3.4 Insertion Loss Insertion loss of the adaptor and the measurement conditions shown in Table 4. Figure 1 shows the measurement system. Measured Adaptor Light-Source Master Cord Master Plug Master Cord Master Plug Optical Power Meter Photo Detector Figure 1 Insertion loss measurement system Table 4 Insertion loss and the measurement conditions Parts Number Insertion Loss Light-Source Conditions Wavelength Master Cord Terminated SAA-3 1uu00 SAA-3 2uu00 ( Slit Sleeve : Phosphor Bronze ) ( Slit Sleeve : Zirconia Ceramics ) 0.7dB or Less LD or LED 1.3 µm Flat Polishing with Buffing 0.4dB or Less LD 1.3 µm PC Polishing 4. PACKING The product is packed to prevent damage during shippment. 5. SHIPPING INSPECTION The insertion loss inspected before shipping. 3 with Marking ( ROGO ) Type without Marking ( ROGO ) Type Unit : mm FIgure 2 SAA-3 4 Unit : mm Figure 3 | Washer Unit : mm Figure 4 ‘ Nut 5 Unit : mm Figure 5 ~ 1 Cap Unit : mm Figure 6 ~ -2 Cap 6 .


SA9V0CA SAA-311100 SAA-C505CA-4RC


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)