SDP86XX
Optoschmitt Detector
FEATURES • Side-looking plastic package
• 55¡ (nominal) acceptance angle • Wide sensitivit...
SDP86XX
Optoschmitt Detector
FEATURES Side-looking plastic package
55¡ (nominal) acceptance angle Wide sensitivity ranges TTL/LSTTL/CMOS compatible Buffer (SDP8600/8601/8602) or inverting (SDP8610/8611/8612) logic available Three different lead spacing arrangements Mechanically and spectrally matched to SEP8506 and SEP8706 infrared emitting diodes
INFRA--6.TIF
DESCRIPTION The SDP86XX series is a family of single chip Optoschmitt IC detectors molded in a side-looking black plastic package to minimize the effect of visible ambient light. The photodetector consists of a photodiode, amplifier, voltage
regulator, Schmitt trigger and an
NPN output
transistor with a 10 kì (nominal) pull-up resistor. Output rise and fall times are independent of the rate of change of incident light. Detector sensitivity has been internally temperature compensated. Flexibility of use is enhanced by a choice of three different lead configurations; in-line (SDP8601/8611), 0.05 in.(1.27 mm) offset pin circle (SDP8600/8610) and 0.10 in. (2.54 mm) offset center lead (SDP8602/8612). Device Polarity: Buffer - Output is HI when incident light intensity is above the turn- on threshold level. Inverter - Output is LO when incident light intensity is above the turn- on threshold level.
OUTLINE DIMENSIONS in inches (mm) Tolerance 3 plc decimals ±0.005(0.12) 2 plc decimals ±0.020(0.51)
DIM_028.cdr
200
h
Honeywell reserves the right to make changes in order to improve design and supply the best...