DatasheetsPDF.com

SE5534 Dataheets PDF



Part Number SE5534
Manufacturers Philips
Logo Philips
Description Dual and single low noise op amp
Datasheet SE5534 DatasheetSE5534 Datasheet (PDF)

Philips Semiconductors Linear Products Product specification Dual and single low noise op amp NE5533/5533A/ NE/SA/SE5534/5534A DESCRIPTION The 5533/5534 are dual and single high-performance low noise operational amplifiers. Compared to other operational amplifiers, such as TL083, they show better noise performance, improved output drive capability and considerably higher small-signal and power bandwidths. This makes the devices especially suitable for application in high quality and professi.

  SE5534   SE5534


Document
Philips Semiconductors Linear Products Product specification Dual and single low noise op amp NE5533/5533A/ NE/SA/SE5534/5534A DESCRIPTION The 5533/5534 are dual and single high-performance low noise operational amplifiers. Compared to other operational amplifiers, such as TL083, they show better noise performance, improved output drive capability and considerably higher small-signal and power bandwidths. This makes the devices especially suitable for application in high quality and professional audio equipment, in instrumentation and control circuits and telephone channel amplifiers. The op amps are internally compensated for gain equal to, or higher than, three. The frequency response can be optimized with an external compensation capacitor for various applications (unity gain amplifier, capacitive load, slew rate, low overshoot, etc.) If very low noise is of prime importance, it is recommended that the 5533A/5534A version be used which has guaranteed noise specifications. PIN CONFIGURATIONS NE/SA/SE5534/5534A D, FE, N Packages BALANCE INVERTING INPUT NON-INVERTING V1 2 3 4 TOP VIEW 8 7 6 5 BALANCE/ COMPENSATION V+ OUTPUT COMPENSATION NE5533/5533A N Package INV INPUT A 1 14 BAL COMP A 13 COMP A 12 OUTPUT A 11 V+ 10 OUTPUT B 9 8 TOP VIEW COMP B BAL COMP B FEATURES NON–INV INPUT A 2 BALANCE A 3 V– 4 BALANCE B 5 NON–INV B 6 INV B 7 • Small-signal bandwidth: 10MHz • Output drive capability: 600Ω, 10VRMS at VS=±18V • Input noise voltage: 4nVń ǸHz • DC voltage gain: 100000 • AC voltage gain: 6000 at 10kHz • Power bandwidth: 200kHz • Slew rate: 13V/µs • Large supply voltage range: ±3 to ±20V APPLICATIONS • Audio equipment • Instrumentation and control circuits • Telephone channel amplifiers • Medical equipment ORDERING INFORMATION DESCRIPTION 14-Pin Plastic Dual In-Line Package (DIP) 14-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Small Outline (SO) package 8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Small Outline (SO) package 8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Small Outline (SO) package 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Hermetic Ceramic Dual In-Line Package (CERDIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) TEMPERATURE RANGE 0 to +70°C 0 to +70°C 0 to +70°C 0 to +70°C 0 to +70°C 0 to +70°C 0 to +70°C 0 to +70°C -40°C to +85°C -40°C to +85°C -55°C to +125°C -55°C to +125°C -55°C to +125°C -40°C to +85°C ORDER CODE NE5533N NE5533AN NE5534D NE5534FE NE5534N NE5534AD NE5534AF NE5534AN SA5534N SA5534AD SE5534N SE5534AF SE5534AN SA5534AN 0404B 0404B 0404B 0404B 0174C 0404B 0404B 0174C DWG # 0405B 0405B 0174C August 31, 1994 114 853-0222 13721 Philips Semiconductors Linear Products Product specification Dual and single low noise op amp NE5533/5533A/ NE/SA/SE5534/5534A ABSOLUTE MAXIMUM RATINGS SYMBOL VS VIN VDIFF TA Supply voltage Input voltage Differential input voltage1 Operating temperature range SE SA NE TSTG TJ PD Storage temperature range Junction temperature Power dissipation at 25°C2 16D Pkg 16N Pkg 8D Pkg 8FE Pkg 8N Pkg Output short-circuit duration3 TSOLD Lead soldering temperature (10sec max) 1350 1500 750 800 1150 Indefinite 300 °C mW mW mW mW mW -55 to +125 -40 to +85 0 to +70 -65 to +150 150 °C °C °C °C °C PARAMETER RATING ±22 ±V supply ±0.5 UNIT V V V NOTES: 1. Diodes protect the inputs against over voltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential input voltage exceeds 0.6V. Maximum current should be limited to ±10mA. 2. For operation at elevated temperature, derate packages based on the following junction-to-ambient thermal resistance: 8-pin ceramic DIP 150°C/W 8-pin plastic DIP 105°C/W 8-pin plastic SO 160°C/W 16-pin plastic DIP 80°C/W 16-pin plastic SO 90°C/W 3. Output may be shorted to ground at VS=±15V, TA=25°C. Temperature and/or supply voltages must be limited to ensure dissipation rating is not exceeded. August 31, 1994 115 Philips Semiconductors Linear Products Product specification Dual and single low noise op amp NE5533/5533A/ NE/SA/SE5534/5534A DC ELECTRICAL CHARACTERISTICS TA=25°C, VS=±15V, unless otherwise specified. 1, 2, 3 SYMBOL VOS Offset voltage ∆VOS/∆T IOS Offset current ∆IOS/∆T IB Input current ∆IB/∆T ICC VCM CMRR PSRR AVOL Supply current per op amp Common mode input range Common mode rejection ratio Power supply rejection ratio Large-signal voltage gain RL≥600Ω, VO=±10V Over temperature RL≥600Ω Over temperature RL≥600Ω, VS=±18V RL≥2kΩ Over temperature 50 25 ±12 ±10 ±15 ±13 ±12 50 Over temperature ±12 80 ±13 100 10 100 ±13 ±12 ±16 ±13.5 ±12.5 100 38 50 25 15 ±12 ±10 ±15 ±13 ±12 30 Over temperature 5 4 6.5 9 ±12 70 Over temperature 200 400 800 1500 5 4 ±13 100 10 100 ±13 ±12 ±16 ±13.5 ±12.5 100 38 100 8 10 Over temperature 5 10 200 500 200 500 1500 2000 PARAMETER .


SE5532A SE5534 SE5534A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)