DatasheetsPDF.com

SFH6286 Dataheets PDF



Part Number SFH6286
Manufacturers Vishay Siliconix
Logo Vishay Siliconix
Description Optocoupler
Datasheet SFH6286 DatasheetSFH6286 Datasheet (PDF)

www.vishay.com SFH628A, SFH6286 Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, Low Input Current 1 1 A/C 1 C/A 2 1 i179080-3 4C 3E DVE FEATURES • High common mode interference immunity • Isolation test voltage, 5300 VRMS • Low coupling capacitance • Good CTR linearity depending on forward current • Low CTR degradation • High collector emitter voltage, VCEO = 55 V • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DIP-4 SMD-4 .

  SFH6286   SFH6286


Document
www.vishay.com SFH628A, SFH6286 Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, Low Input Current 1 1 A/C 1 C/A 2 1 i179080-3 4C 3E DVE FEATURES • High common mode interference immunity • Isolation test voltage, 5300 VRMS • Low coupling capacitance • Good CTR linearity depending on forward current • Low CTR degradation • High collector emitter voltage, VCEO = 55 V • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DIP-4 SMD-4 pin groove 1 DESCRIPTION The SFH628A (DIP) and SFH6286 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared emitting diode, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 or SMD package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8 mm are achieved with option 6. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation to an operation voltage of 400 VRMS or DC. ORDERING INFORMATION S F H 6 2 8 x - # PART NUMBER CTR BIN APPLICATIONS • Telecom • Industrial controls • Battery powered equipment • Office machines AGENCY APPROVALS • UL1577, file no. E52744 system code H • DIN EN 60747-5-5 (VDE0884-5), available with option 1 • BSI IEC 60950; IEC 60065 X 0 # # T PACKAGE OPTION TAPE AND REEL DIP-# 7.62 mm Option 6 Option 7 10.16 mm Option 8 > 0.7 mm SFH6286 Option 9.27 mm > 0.1 mm AGENCY CERTIFIED/ PACKAGE UL, BSI DIP-4 SFH6286 option 63 to 200 SFH628A-2T (1) - SFH628A 100 to 320 SFH628A-3 - CTR (%) 160 to 500 SFH628A-4 - 63 to 200 - SFH6286-2T (1) SFH6286 100 to 320 SFH6286-3T (1) 160 to 500 - SFH6286-4T (1) VDE, UL, BSI DIP-4 63 to 200 - 100 to 320 SFH628A-3X001 160 to 500 - 63 to 200 - 100 to 320 - 160 to 500 - DIP-4, 400 mil, option 6 SFH628A-2X016 SFH628A-3X016 SFH628A-4X016 - - - SMD-4, option 7 - SFH628A-3X017T - - - - SMD-4, option 8 SFH628A-2X018 - SFH6286 option - - - - - - - SFH6286-2X001T SFH6286-3X001T SFH6286-4X001T (1) Notes • Additional options may be possible, please contact sales office. (1) Also available in tubes; do not add T to end. Rev. 2.1, 28-Feb-14 1 Document Number: 83722 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 www.vishay.com SFH628A, SFH6286 Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT DC forward current Surge forward current Power dissipation OUTPUT t ≤ 10 μs IF ± 50 mA IFSM ± 2.5 A Pdiss 76 mW Collector emitter voltage Emitter collector voltage Collector current Power dissipation COUPLER tp ≤ 1 ms VCEO 55 V VECO 7 V IC 50 mA IC 100 mA Pdiss 150 mW Isolation test voltage VISO 5300 VRMS Creepage distance ≥7 mm Clearance distance ≥7 mm Insulation thickness between ≥ 0.4 mm Comparative tracking index per DIN IEC112/ 175 Isolation resistance Storage temperature range Ambient temperature range Soldering temperature (1) VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 Ω VIO = 500 V, Tamb = 100 °C RIO ≥ 1011 Ω Tstg -55 to +150 °C Tamb -55 to +100 °C max. 10 s, dip soldering distance Tsld 260 °C Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage Capacitance Thermal resistance OUTPUT IF = ± 5 mA VR = 0 V, f = 1 MHz VF CO Rthja 1.1 1.5 V 45 pF 1070 K/W Collector emitter leakage current Collector emitter capacitance Thermal resistance COUPLER VCE = 10 V VCE = 5 V, f = 1 MHz ICEO CCE Rthja 10 200 nA 7 pF 500 K/W Collector emitter saturation voltage IF = ± 1 mA, IC = 0.5 mA IF = ± 1 mA, IC = 0.8 mA IF = ± 1 mA, IC = 1.25 mA SFH628A-2 SFH6286-2 SFH628A-3 SFH6286-3 SFH628A-4 SFH6286-4 VCEsat VCEsat VCEsat VCEsat VCEsat VCEsat 0.25 0.4 V 0.25 0.4 V 0.25 0.4 V 0.25 0.4 V 0.25 0.4 V 0.25 0.4 V Note • Minimum and maximum values are testing requirements. T.


SFH628-4X SFH6286 SFH6286


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)