Silicon Bridge Rectifiers
Silicon Bridge Rectifiers
COMCHIP
www.comchiptech.com
MP1000 Thru 1010
Reverse Voltage: 50 - 1000 Volts Forward Curren...
Description
Silicon Bridge Rectifiers
COMCHIP
www.comchiptech.com
MP1000 Thru 1010
Reverse Voltage: 50 - 1000 Volts Forward Current: 10 Amp
Features
- Diffused Junction
-
High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has Underwriters Laboratory Flammability Classification 94V-O
MP-10
H J G
+
~
A
E
~
E
-
Mechanical Data
- Case: Molded Plastic - Terminals: Plated Leads Solderable per MIL STD-202, Method 208 - Weight: 5.4 grams (approx.) - Mounting Position: Through Hole for #6 Screw - Mounting Torque: 5.0 Inch-pounds Maximum
D
Dim A B C D E
C B
Metal Heat Sink
MP-10 Min Max 14.73 15.75 5.80 6.90 19.00 1.00 Ø Typical 5.11 6.14 Hole for # 6 screw G 3.60 4.00 H 10.30 11.30 J 2.38 x 45oC Typical All Dimensions in mm
Maximum Ratings and Electrical Characterics
Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. CHARACTERISTICS Peak Repetitive Reverse Voltage Working Peak Rever se Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note1) @ T A = 50°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage (per element) @I F = 5.0A Peak Reverse Current @T C = 25°C At Rated DC Blocking Voltage @T C = 100°C I2t Rating for Fusing (t < 8.3ms) (Note2) Typical Junction Capacitance (Note3) Typical Thermal Resistance (Note4) Operating and ...
Similar Datasheet