74HC4016

INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT4016 Quad bilateral switches Product specification File under Integrated Circuits, IC06 December 1990 Philips Semiconductors Product specification Quad bilateral switches 74HC/HCT4016 FEATURES Low “ON” resistance: 160 Ω (typ.) at VCC = 4.5 V 120 Ω (typ.) at VCC = 6.0 V 80 Ω (typ.) at VCC = 9.0 V Individual switch controls Typical “break before make” built in Output capability: non-standard ICC category: SSI GENERAL DESCRIPTION The 74HC/HCT4016 are high-speed Si-gate CMOS devices and are pin compatible with the “4016” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4016 have four independent analog switches (transmission gates). Each switch has two input/output terminals (Yn, Zn) and an active HIGH enable input (En). When En is connected to VCC, a low bidirectional path between Yn and Zn is established (ON condition). When En is connected to ground (GND), the switch is disabled and a high impedance between Yn and Zn is established (OFF condition). Current through a switch will not cause additional VCC current provided the voltage at the terminals of the switch is maintained within the supply voltage range; VCC >> (VY, VZ) >> GND. Inputs Yn and Zn are electrically ...