DatasheetsPDF.com

M63800FP Dataheets PDF



Part Number M63800FP
Manufacturers Mitsubishi
Logo Mitsubishi
Description 7-UNIT 500mA SOURCE TYPE DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE
Datasheet M63800FP DatasheetM63800FP Datasheet (PDF)

MITSUBISHI SEMICONDUCTOR M63800FP 7-UNIT 500mA SOURCE TYPE DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE DESCRIPTION M63800FP is a seven-circuit output-sourcing Darlington transistor array. The circuits are made of PNP and NPN transistors. This semiconductor integrated circuit performs highcurrent driving with extremely low input-current supply. PIN CONFIGURATION        INPUT         16 →O1  15 →O2   14 →O3  13 →O4  OUTPUT 12 →O5  11 →O6  10 →O7  9 GND .

  M63800FP   M63800FP



Document
MITSUBISHI SEMICONDUCTOR M63800FP 7-UNIT 500mA SOURCE TYPE DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE DESCRIPTION M63800FP is a seven-circuit output-sourcing Darlington transistor array. The circuits are made of PNP and NPN transistors. This semiconductor integrated circuit performs highcurrent driving with extremely low input-current supply. PIN CONFIGURATION        INPUT         16 →O1  15 →O2   14 →O3  13 →O4  OUTPUT 12 →O5  11 →O6  10 →O7  9 GND IN1→ 1 IN2→ 2 IN3→ 3 IN4→ 4 IN5→ 5 IN6→ 6 IN7→ 7 VS 8        FEATURES High breakdown voltage (BV CEO ≥ 50V) High-current driving (Io(max) = –500mA) With output clamping diodes Driving available with CMOS IC output of 6-16V or with TTL output Wide operating temperature range (Ta = –20 to +75°C) Output current-sourcing type Package type 16P2N-A CIRCUIT DIAGRAM APPLICATION Drives of relays, printers, LEDs, fluorescent display tubes and lamps, and interfaces between MOS-bipolar logic systems and relays, solenoids, or small motors VS 20K INPUT 3K 7.2K 1.5K 3K OUTPUT FUNCTION The M63800FP has seven circuits, which are made of input inverters and current-sourcing outputs. The outputs are made of PNP transistors and NPN Darlington transistors. The PNP transistor base current is constant. A spike-killer clamping diode is provided between each output pin and GND. V S (pin 8) and GND (pin 9) are used commonly among the eight circuits. The input has resistance of 3k Ω, and a maximum of 10V can be applied. The output current is 500mA maximum. Supply voltage V S is 50V maximum. The M63800FP is enclosed in a molded small flat package, enabling space-saving design. GND The seven circuits share the VS and GND. The diode, indicated with the dotted line, is parasitic, and cannot be used. Unit : Ω ABSOLUTE MAXIMUM RATINGS Symbol VCEO VS VI IO IF VR Pd Topr Tstg # # (Unless otherwise noted, Ta = –20 ~ +75 °C) Parameter Collector-emitter voltage Supply voltage Input voltage Output current Clamping diode forward current Clamping diode reverse voltage Power dissipation Operating temperature Storage temperature Output, L Conditions Ratings –0.5 ~ +50 50 –0.5 ~ +10 –500 –500 50 Unit V V V mA mA V W °C °C Current per circuit output, H Ta = 25 °C, when mounted on board 1.00 –20 ~ +75 –55 ~ +125 # : Unused I/O pins must be connected to GND. Aug. 1999 MITSUBISHI SEMICONDUCTOR M63800FP 7-UNIT 500mA SOURCE TYPE DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE RECOMMENDED OPERATING CONDITIONS Symbol VS Supply voltage Output current (Current per 1 circuit when 7 circuits are coming on simultaneously) “H” input voltage “L” input voltage Parameter (Unless otherwise noted, Ta = –20 ~ +75°C) min 0 Limits typ — — — 5 — max 50 –350 Unit V IO Duty Cycle no more than 7% Duty Cycle no more than 40% 0 0 2.4 0 mA –100 10 0.2 V V VIH VIL ELECTRICAL CHARACTERISTICS Symbol IS (leak) # VCE (sat) II IS VF IR # (Unless otherwise noted, Ta = –20 ~ +75°C).


MPC185 M63800FP AN8053N


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)