DFA20E48D12

DFA20 SERIES DUAL OUTPUT DESCRIPTION The compact, dual output DFA20 series provides power densities up to 11 watts per cubic inch (0.67 watts per cm3). Ideal for battery operated industrial, medical control and remote data collection systems, this converter has fully filtered inputs and outputs. Complete overload protection with independent pulse-by-pulse current limiting and an overtemperature shutdown ensures reliable system operation. Converters with 48 volt inputs are isolated to 1544 volts. FEATURES Remote ON/OFF and TRIM Water Washable Case Overcurrent Protection and Thermal Shutdown Efficiencies to 85% Low Input to Output Capacitance 700Volt to 1544Volt Isolation Five-Side Shielded Case Extended Range Input (2:1) BOTTOM VIEW 2.02 (51.31) SIDE VIEW 0.040 (1.02) DIA 7 PLACES 1.100 (27.94) 0.700 (17.78) 0.600 (15.24) 0.400 (10.16) 0.300 (7.62) 0.000 0.100 (2.54) 0.51 (13.0) 4 5 1 2 6 2.02 (51.31) 3 7 0.25 (6.35) 0.11 (2.8) 0.000 1.800 (45.72) Mechanical tolerances unless otherwise noted: X.XX dimensions: ±0.020 inches X.XXX dimensions: ±0.005 inches 0.45 (11.43) 0.000 NOTES (1) All parameters measured at Tc = 25°C, nominal input voltage and full rated load unless otherwise noted. Refer to the Technical Reference Section for the definition of terms, measurement circuits and other information. NOTES (cont) (2) Case is electrically connected to Pin 2, -Input. (3) The functional case operating range is intended to give an additional data point f...