DFC15U48S15

DFC15 SERIES SINGLE OUTPUT DESCRIPTION The DFC15 Series of DC/DC converters are designed to provide a wide range of PCB power solutions. The converter features dual output filters for low noise. Trim and remote ON/OFF features give flexibility to designs. The output of the converter is electrically isolated, thereby allowing the output to be configured as a positive or negative output voltage. The ultra-wide input range, from 20 to 60 volts, allows use in many industrial and communication applications. Selection Chart Model DFC15U48S5 DFC15U48S12 DFC15U48S15 Input Range VDC Min 20 20 20 Max 60 60 60 Output VDC 5 12 15 Output mA 3000 1250 1000 BOTTOM VIEW 2.02 (51.31) SIDE VIEW 0.040 (1.02) DIA 6 PLACES FEATURES Up to 15 Watts Output Power Efficiencies to 83% Very Low OFF Current 700V Isolation Dual Stage Output filter -40°C to +90°C Operation Ultra-Wide Range Input (3:1) Remote ON/OFF and TRIM General Specifications (1) All Models ON/OFF Function (2) OFF Logic Level or Pin Open OFF Logic Level Input Resistance Converter Idle Current ON/OFF Pin Low Isolation (3) Isolation Voltage Input to Output 10 µA Leakage Input to Output Capacitance Output Trim Function Input Resistance Open Circuit Voltage Environmental Case Operating Range, Tc No Derating Storage Range Thermal Impedance (5) General MTBF (Calculated) Unit Weight Chassis Mounting Kit NOTES (1) All parameters measured at Tc = 25°C, nominal input voltage and full rated load unless otherwise noted. Refer to ...