DGP12U5D5

DGP12 SERIES DUAL OUTPUT DESCRIPTION The dual output DGP12 Series provides symmetrical +/– outputs from 5 volts to 15 volts in packages that provide power densities up to 7 watts per cubic inch (0.43 watts per cm3). Designed to operate on ultra-wide input voltages from 3.5 to 16 volts, and with remote ON/OFF capability, the DGP12 supplies power from battery or system sources . The fully isolated, shielded case allows precise operation in sensitive environments. FEATURES Remote ON/OFF and TRIM Five-Side Shielded Copper Case Typical Efficiency up to 78% Fully Isolated and Filtered 700V Isolation Ultra Wide Range Input (4:1) BOTTOM VIEW 2.02 (51.31) SIDE VIEW 0.040 (1.02) DIA 7 PLACES 1.100 (27.94) 0.700 (17.78) 0.600 (15.24) 0.400 (10.16) 0.300 (7.62) 0.000 0.100 (2.54) 0.51 (13.0) 4 5 1 2 6 2.02 (51.31) 3 7 0.25 (6.35) 0.11 (2.8) 0.000 1.800 (45.72) Mechanical tolerances unless otherwise noted: X.XX dimensions: ±0.020 inches X.XXX dimensions: ±0.005 inches NOTES (1) All parameters measured at Tc = 25°C, nominal input voltage and full rated load unless otherwise noted. Refer to the Technical Reference Section for the definition of terms, measurement circuits and other information. (2) See the DGP12 Series Application Notes for more information on applying the ON/OFF pin. (3) The Case is tied to the -Input pin. (4) The functional temperature range is intended to give an additional data point for use in evaluating this power supply. At the low functional t...