DatasheetsPDF.com

DK13 Dataheets PDF



Part Number DK13
Manufacturers Dynex
Logo Dynex
Description Fast Switching Thyristor
Datasheet DK13 DatasheetDK13 Datasheet (PDF)

DK13..FW DK13..FW Fast Switching Thyristor Replaces January 2000 version, DS4267-3.0 DS4267-4.0 July 2001 FEATURES s Low Switching Losses At High Frequency. s Fully Characterised For Operation Up To 20kHz. KEY PARAMETERS VDRM IT(RMS) ITSM dVdt dI/dt tq 800V 110A 1200A 200V/µs 200A/µs 10µs APPLICATIONS s High Power Inverters And Choppers. s UPS. s AC Motor Drives. s Induction Heating. s Cycloconverters. VOLTAGE RATINGS Type Number Repetitive Peak Voltages VDRM VRRM V 800 600 Conditions DK13.

  DK13   DK13



Document
DK13..FW DK13..FW Fast Switching Thyristor Replaces January 2000 version, DS4267-3.0 DS4267-4.0 July 2001 FEATURES s Low Switching Losses At High Frequency. s Fully Characterised For Operation Up To 20kHz. KEY PARAMETERS VDRM IT(RMS) ITSM dVdt dI/dt tq 800V 110A 1200A 200V/µs 200A/µs 10µs APPLICATIONS s High Power Inverters And Choppers. s UPS. s AC Motor Drives. s Induction Heating. s Cycloconverters. VOLTAGE RATINGS Type Number Repetitive Peak Voltages VDRM VRRM V 800 600 Conditions DK13 08FW K or M DK13 06FW K or M VRSM = VRRM + 100V IDRM = IRRM = 15mA at VRRM or VDRM & Tvj Outline type code: TO94 See Package Details for further information. ORDERING INFORMATION When ordering, select the required part number shown in the Voltage Ratings selection table, then:Add K to type number for 1/2" 20 UNF thread, e.g. DK13 06FWK or Add M to type number for M12 thread, e.g. DK13 06FM. Note: Please use the complete part number when ordering and quote this number in any future correspondance relating to your order. Fig. 1 Package outline 1/13 www.dynexsemi.com DK13..FW CURRENT RATINGS Symbol IT(AV) IT(RMS) Parameter Mean on-state current RMS value Conditions Half wave resistive load, Tcase = 80oC Tcase = 80oC Max. 70 110 Units A A SURGE RATINGS Symbol ITSM I2t Parameter Surge (non-repetitive) on-state current I2t for fusing Conditions tp = 10ms half sine; Tcase = 125oC VR = 0% VRRM - 1/4 sine Max. 1.2 7.2 x 103 Units kA A2s THERMAL AND MECHANICAL DATA Symbol Rth(j-c) Rth(c-h) Parameter Thermal resistance - junction to case Thermal resistance - case to heatsink dc Mounting torque 15.0Nm with mounting compound On-state (conducting) Tvj Virtual junction temperature Reverse (blocking) Tstg Storage temperature range Mounting torque -40 12.0 125 150 15.0 o Conditions Min. - Max. 0.24 0.08 125 Units o C/W C/W o o C C C o Nm MEASUREMENT OF RECOVERED CHARGE - QRA1 Measurement of QRA1 : QRA1 = IRR x tRR 2 ITM QRA1 tp = 1ms dIR/dt IRR 0.5x IRR 2/13 www.dynexsemi.com DK13..FW DYNAMIC CHARACTERISTICS Symbol VTM IRRM/IDRM dV/dt Parameter Maximum on-state voltage Peak reverse and off-state current Maximum linear rate of rise of off-state voltage Conditions At 300A peak, Tcase = 25oC At VRRM/VDRM, Tcase = 125oC Linear to 60% VDRM Tj = 125oC, Gate open circuit Gate source 20V, 20Ω dI/dt Rate of rise of on-state current tr < 0.5µs, Tj = 125˚C At Tvj = 125oC At Tvj = 125oC Tj = 25˚C, IT = 50A, VD = 300V, IG = 1A, dI/dt =50A/µs, dIG/dt = 1A/µs Tj = 25oC, ITM = 1A, VD = 12V Tj = 125˚C, IT = 100A, VR = 50V, tq code: W dV/dt = 200V/µs (Linear to 60% VDRM), dIR/dt = 30A/µs, Gate open circuit Repetitive 50Hz Non-repetitive Min. 60* Max. 2.35 15 200 500 800 1.65 3.5 3 1.5 10 Units V mA V/µs A/µs A/µs V mΩ µs µs mA µs VT(TO) rT tgd t(ON)TOT IH Threshold voltage On-state slope resistance Delay time Total turn-on time Holding current tq Turn-off time *Typical value. GATE TRIGGER CHARACTERISTICS AND RATINGS Symbol VGT IGT VGD VRGM IFGM PGM PG(AV) Par.


DK1001-7R DK13 DK1301-7R


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)