3052-xxx

Model 3052 Vibration/Shock Monitoring PC Board Mountable Accelerometer Millivolt Output Integral Temperature Compensation Modal Analysis Motion Control Crash Testing Aerospace DESCRIPTION The Model 3052 is a piezoresistive silicon accelerometer with integral temperature compensation. It is packaged on a ceramic substrate with an epoxy sealed ceramic cover and is designed for adhesive mounting. The accelerometer consists of a micro machined silicon mass suspended by multiple beams from a silicon frame. Piezoresistors located in the beams change their resistance as the motion of the suspended mass changes the strain in the beams. Silicon caps on the top and bottom of the device are added to provide over-range stops. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. Each sensor is individually serialized. For an accelerometer with a mounting bracket which can be used to bolt the sensor to the mounting location see the Model 3058. For uncompensated accelerometers, please refer to the Models 3022 and 3028. Accelerometers FEATURES Adhesive Mount ±0.5% Non-linearity (typical) ±1.0% Temperature Performance (Typical) DC Response Built-in Damping Built-in Overrange Stops Low Power STANDARD RANGES Range ±2 ±5 ±10 g Range ±20 ±50 ±100 g I n t e r n e t : w w w. m s i u s a . c o m Te l : 1 - 7 5 7 - 7 6 6 - 1 5 0 0 N o r t h A m e r i c a To l l F r e e : 1 - 8 0 0 -...