High Speed +3.0V to +5.5V RS-232 Driver/Receiver Pair
®
SP3220B/U
High Speed +3.0V to +5.5V RS-232 Driver/Receiver Pair
■ Meets True RS-232 Protocol Operation From A +3.0V ...
Description
®
SP3220B/U
High Speed +3.0V to +5.5V RS-232 Driver/Receiver Pair
■ Meets True RS-232 Protocol Operation From A +3.0V to +5.5V Power Supply ■ Minimum 250 Kbps Data Rate (SP3220B) or 1Mbps Data Rate (SP3220U) under Fully Load ■ 1µA Low-Power Shutdown With Receivers Active ■ Interoperable With EIA/TIA - 232 and adheres to EIA/TIA - 562 Down to +2.7V Power Source ■ Pin-Compatible With The MAX3221E Device Without The AUTO ON-LINE® Feature ■ ESD Specifications: +2kV Human Body Model
DESCRIPTION The SP3220B/U device is an RS-232 driver/receiver solution intended for portable or hand-held applications such as notebook or palmtop computers. The SP3220B/U device has a highefficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump allows the SP3220B/U device to deliver true RS-232 performance from a single power supply ranging from +3.3V to +5.0V. The SP3220B/U device has a low-power shutdown mode where the driver outputs and charge pumps are disabled. During shutdown, the supply current falls to less than 1µA.
VCC + 15 VCC 2 C1+ 0.1µF 4 C15 C2+ C2 + 0.1µF 6 C211 T1IN 9 R1OUT 5kΩ 1 EN GND 14 *can be returned to either VCC or GND SHDN 16 T1OUT R1IN 13 8 V+ 3 *C3 + 0.1µF
C5
0.1µF
C1
+
SP3220B/U
V-
7 C4 + 0.1µF
LOGIC INPUTS LOGIC OUTPUTS
RS-232 OUTPUTS RS-232 INPUTS
Rev. 7/8/03
SP3220B/U +3.0 to +5.0V RS-232 Transceivers
© Copyright 2003 Sipex Corporation
1
SP 32 20 B/U
ABSOLUTE MAXIMUM RATINGS
These are stress ratings on...
Similar Datasheet