Low Power Half-Duplex RS-485 Transceivers
SP481/SP483/SP485
Low Power Half-Duplex RS-485 Transceivers
FEATURES ■ +5V Only
■ Low Power BiCMOS ■ Driver/Receiver E...
Description
SP481/SP483/SP485
Low Power Half-Duplex RS-485 Transceivers
FEATURES ■ +5V Only
■ Low Power BiCMOS ■ Driver/Receiver Enable
■ Slew Rate Limited Driver for Low EMI (SP483)
■ Low Power Shutdown Mode (SP481 and SP483)
■ RS-485 and RS-422 Drivers/Receivers
RO 1
R
8 VCC
RE 2
7B
DE 3
6A
DI 4
D
SP485 5 GND
Top View
SP481, SP483, SP485 Pinout (Top View)
DESCRIPTION
The SP481, SP483, and the SP485 are a family of half-duplex transceivers that meet the requirements of RS-485 and RS-422. Their BiCMOS design allows low power operation without sacrificing performance. The SP481 and SP485 meet the requirements of RS-485 and RS-422 up to 5Mbps. Additionally, the SP481 is equipped with a low power Shutdown mode. The SP483 is internally slew rate limited to reduce EMI and can meet the requirements of RS-485 and RS-422 up to 250kbps. The SP483 is also equipped with a low power Shutdown mode.
RO 1 RE 2 DE 3 DI 4
R D
8 Vcc 7B 6A 5 GND
SP481, SP483, and SP485
Rev. 07/28/04
SP481/483/485 Low Power Half-Duplex RS485 Transceivers
1
© Copyright 2002 Sipex Corporation
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.
VCC.......................................................................................................
Similar Datasheet