SP514

® SP514 WAN Multi-Mode Serial Transceiver ■ +5V Only ■ Seven (7) Drivers and Seven (7) Receivers ■ Driver and Receiver Tri-State Control ■ Reduced V.35 Termination Network ■ Pin Compatible with the SP504 ■ Improved Propagation Delays ■ Software Selectable Interface Modes: -RS-232E (V.28) -RS-422A (V.11, X.21) -RS-449 (V.11 & V.10) -RS-485 -V.35 -EIA-530 (V.11 & V.10) -EIA-530A (V.11 & V.10) -V.36 DESCRIPTION The SP514 is a single chip devices that supports eight (8) physical serial interface standards for Wide Area Network connectivity. The product is fabricated using a low power BiCMOS process technology, and incorporates a Sipex patented (5,306,954) charge pump allowing +5V only operation. The SP514 is 100% compatible with the SP504 multi-protocol serial transceiver IC. All applications using the SP504 can also use the SP514. The SP514 has slightly improved AC performance for its V.35 and V.11 drivers and receivers. V.35 EIA-530 WAN Rev. 3/05/04 SP514 Multi–Mode Serial Transceiver © Copyright 2004 Sipex Corporation 1 ABSOLUTE MAXIMUM RATINGS These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. VCC............................................................................+7V Input Voltages: Logic...............................-0.3V...