SP8107

Advanced SP8107 Three Channel High Performance Laser Driver FEATURES Three current controlled inputs with independent ENABLE/DISABLE Two selectable outputs for grounded laser diodes Output current up to 400mA (250mA per input channel) Independent swing for each output channel controlled by external resistor On-chip oscillator with resistor controlled frequency Single 5V power supply Common ENABLE and oscillator ENABLE inputs TTL/CMOS logic level control signals Small SSOP16 package IR I2 I3 RF EN2 EN3 ENABLE OSCEN 1 2 3 4 5 6 7 8 SP8107 SSOP-16 16 15 14 13 12 11 10 9 Vcc Iout A GND RSA RSB Iout B SELA Vcc APPLICATION DVD-RAM with CD-RW capability DVD-RW with CD-RW capability Writable data storage optical devices GENERAL DESCRIPTION The SP8107 is a three channel laser diode driver specifically designed for high speed DVD-RW or DVDRAM applications. It operates two grounded laser diodes (650nm for DVD and 780nm for CD) and features three input channels that allow setting of three different optical power levels. The first channel (IR) has lower gain (100mA/mA) and output current (up to 200mA) and is used as a read channel. The second (I2) and third (I3) channels have higher gain (250mA/mA) and output current (up to 250mA) and are used as write channels. Each write channel may be switched on/off at very fast switching speeds with TTL/CMOS logic level signals applied to EN2 and EN3 inputs - channels are enabled at low logic level and disabled at high...