P1602C

Compak Two-chip SIDACtor Device Compak Two-chip SIDACtor Device 1 (T) 3 (R) 2 (G) The modified DO-214AA SIDACtor device provides low-cost, longitudinal protection. SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68). Electrical Parameters Part Number P1402C_ P1602C_ P2202C_ P2702C_ P3002C_ P3602C_ P4202C_ P4802C_ P6002C_ VDRM Volts 58 65 90 120 140 170 190 220 275 VS Volts 77 95 130 160 180 220 250 300 350 VDRM Volts Pins 1-3 116 130 180 240 280 340 380 440 550 154 190 260 320 360 440 500 600 700 VS Volts VT Volts 4 4 4 4 4 4 4 4 4 IDRM µAmps 5 5 5 5 5 5 5 5 5 IS mAmps 800 800 800 800 800 800 800 800 800 IT Amps 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 IH mAmps 120 120 120 120 120 120 120 120 120 CO pF Pins 1-3 15 15 15 15 15 15 15 15 15 Pins1-2, 2-3 * For surge ratings, see table below. General Notes: All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range. IPP is a repetitive surge rating and is guaranteed for the life of the product. Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities. VDRM is measured at IDRM. VS is measured at 100 V/µs. Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request. Off-state capacitance (CO) is measured between Pins...