Triple RS-422/RS-485 Receivers
Click here for production status of specific part numbers.
MAX3097E/MAX3098E
±15kV ESD-Protected, 32Mbps, 3V/5V, Triple...
Description
Click here for production status of specific part numbers.
MAX3097E/MAX3098E
±15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection
General Description
The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers’ inputs have fault thresholds that detect when the part is not in a valid state.
The MAX3097E/MAX3098E indicate when a receiver input is in an open-circuit condition, short-circuit condition, or outside the common-mode range. They also generate a fault indication when the differential input voltage goes below a preset threshold. See Ordering Information or the Electrical Characteristics for threshold values.
The fault circuitry includes a capacitor-programmable delay to ensure that there are no erroneous fault conditions even at slow edge rates. Each receiver is capable of accepting data at rates up to 32Mbps.
Applications
●● RS-485/RS-422 Receivers for Motor-Shaft Encoders ●● High-Speed, Triple RS-485/RS-422 Receiver with Extended Electrostatic Discharge (ESD) ●● Triple RS-485/RS-422 Receiver with Input Fault Indication ●● Telecommunications ●● Embedded Systems
Typical Application Circuit
ENCODED SIGNALS A, A, B, B, Z, Z
MOTOR
MAX3097E MAX3098E
RECEIVER OUTPUTS
DSP 8
ALARM OUTPUTS
MOTOR CONTROLLER
MAX547 12-BIT D/A
MOTOR DRIVER
Features
●● Detects the Following RS-485 Faults: Open-Circuit Condition Short-Circuit Condition Low Dif...
Similar Datasheet