Low-Profile / 3V / 120A / IrDA Infrared Transceiver
19-1390; Rev 0; 10/98
Low-Profile, 3V, 120µA, IrDA Infrared Transceiver
General Description
The MAX3120 IrDA 1.2-compat...
Description
19-1390; Rev 0; 10/98
Low-Profile, 3V, 120µA, IrDA Infrared Transceiver
General Description
The MAX3120 IrDA 1.2-compatible infrared transceiver is optimized for battery-powered, space-constrained applications. It consumes only 120µA while supporting data rates up to 115kbps over a wide 3V to 5.5V operating range, and features a 10nA shutdown mode to further extend battery life. The MAX3120 reduces the space required for IrDA applications by requiring a minimum of external components: photodiode, infrared LED, and current-setting resistor. Optical components are external to allow maximum flexibility in PC board design. The MAX3120 is available in 8-pin µMAX and SO packages. The µMAX package consumes half the board space of an 8-pin SO.
Features
o IrDA 1.2 Compatible: 2.4kbps to 115.2kbps o +3V to +5.5V Single-Supply Operation o Flexible Optics Selection and Layout o 120µA Supply Current o 10nA Shutdown Supply Current o 200mA, High-Current Infrared LED Drive
MAX3120
Ordering Information
PART MAX3120CUA MAX3120CSA MAX3120EUA MAX3120ESA TEMP. RANGE 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C PIN-PACKAGE 8 µMAX 8 SO 8 µMAX 8 SO
Applications
IrDA Applications Personal Digital Assistants (PDAs) Palmtop Computers Cell Phones Hand-Held Equipment Peripherals
Typical Operating Circuit
+3.3V
Pin Configuration
TOP VIEW
CS SCLK DIN DOUT
VCC
VCC
SHDN LED
TX
TXD
LEDC
MAX3100
RX
MAX3120
RXD PINC
TXD VCC GND PINC
1 2 3 4
8
RXD LEDC PGND SHDN
GND GND PGND PIN DI...
Similar Datasheet