+3V to +5.5V RS-232 Transceivers
Click here for production status of specific part numbers.
MAX3221/MAX3223/ MAX3243
+3V to +5.5V RS-232 Transceivers wi...
Description
Click here for production status of specific part numbers.
MAX3221/MAX3223/ MAX3243
+3V to +5.5V RS-232 Transceivers with AutoShutdown
General Description
The MAX3221/MAX3223/MAX3243 achieve 1µA supply current with Maxim’s revolutionary AutoShutdown™ feature. When the MAX3221/MAX3223/MAX3243 do not sense a valid signal level on their receiver inputs, the onboard power supply and drivers shut down. This occurs if the RS-232 cable is disconnected or if the transmitters of the connected peripheral are turned off. The system turns on again when a valid level is applied to any RS-232 receiver input.
The MAX3221/MAX3223/MAX3243 require only 0.1µF capacitors in 3.3V operation, and can operate from input voltages ranging from +3.0V to +5.5V.
A proprietary, high-efficiency, dual charge-pump power supply and a low-dropout transmitter combine to deliver true RS-232 performance from a single +3.0V to +5.5V supply.
The MAX3221 is a 1-driver/1-receiver 16-pin SSOP version of the 20-pin 2-driver/2-receiver MAX3223.
The MAX3243 is a 3-driver/5-receiver with a complementary always-active receiver for external monitoring in a variety of 28 pin packages. See Order Information table for package offerings.
Applications
●● Battery-Powered Equipment ●● Hand-Held Equipment ●● Peripherals ●● Portable Diagnostics Equipment
Selector Guide
PART Tx Rx VCC RANGE (V) AutoShutdown
MAX3221 1 1
3.0 to 5.5
Yes
MAX3223 2 2
3.0 to 5.5
Yes
MAX3243 3 5
3.0 to 5.5
Yes
Pin Configurations appear at end ...
Similar Datasheet