LOW POWER RS-485/RS-422 TRANSCEIVER
ST75C176
LOW POWER RS-485/RS-422 TRANSCEIVER
s s
s
s
s s s s
s
s
LOW QUIESCENT CURRENT: 300µA DESIGNED FOR RS-485 ...
Description
ST75C176
LOW POWER RS-485/RS-422 TRANSCEIVER
s s
s
s
s s s s
s
s
LOW QUIESCENT CURRENT: 300µA DESIGNED FOR RS-485 INTERFACE APPLICATIONS -7V TO 12V COMMON MODE INPUT VOLTAGE RANGE DRIVER MAINTAINS HIGH IMPEDANCE IN 3-STATE OR WITH THE POWER OFF 70mV TYPICAL INPUT HYSTERESIS 30ns PROPAGATION DELAYS, 5ns SKEW OPERATE FROM A SINGLE 5V SUPPLY CURRENT LIMITING AND THERMAL SHUTDOWN FOR DRIVER OVERLOAD PROTECTION ALLOWS UP TO 32 TRANSCEIVERS ON THE BUS BIC MOS TECHNOLOGY
DIP
SOP
DESCRIPTION The ST75C176 is al low power transceiver for RS-485 and RS-422 communication. Each part contains one driver and one receiver. This transceiver draw 300µA (typ.) of supply current when unloaded or fully loaded with disabled drivers. ORDERING CODES
Type ST75C176CN ST75C176BN ST75C176CD ST75C176BD ST75C176CDR ST75C176BDR Temperature Range 0 to 70 °C -40 to 85 °C 0 to 70 °C -40 to 85 °C 0 to 70 °C -40 to 85 °C Package
It operates from a single 5V supply. Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that placed the driver outputs into a high-impedance state. The receiver input has a fail safe feature that guarantees a logic-high output if the input is open circuit. The ST75C176 is designed for bi-directional data communications on multipoint bus transmission line (half-duplex applciations).
Comments 50parts per tube / 40tube per box 50parts per tube / 40tube per box 100parts per tube / 20tube per box 100parts per ...
Similar Datasheet