operational amplifier. LM358 Datasheet


LM358 amplifier. Datasheet pdf. Equivalent


LM358


Low power dual operational amplifier
Philips Semiconductors

Product specification

Low power dual operational amplifiers

NE/SA/SE532/ LM158/258/358/A/2904

DESCRIPTION
The 532/358/LM2904 consists of two independent, high gain, internally frequency-compensated operational amplifiers internally frequency-compensated operational amplifiers designed specifically to operate from a single power supply over a wide range of voltages. Operation from dual power supplies is also possible, and the low power supply current drain is independent of the magnitude of the power supply voltage.

PIN CONFIGURATIONS
D, FE, N Packages

OUTPUT A INVERTING INPUT A NON INVERTING INPUT A V–

1 2 3 4 A –+ B +–

8 7 6 5

V+ OUTPUT B INVERTING INPUT B NON INVERTING INPUT B

UNIQUE FEATURES
In the linear mode the input common-mode voltage range includes ground and the output voltage can also swing to includes ground and the output voltage can also swing to ground, even though operated from only a single power supply voltage. The unity gain cross frequency is temperature-compensated. The input bias current is also temperature-compensated. Figure 1. Pin Configuration

SL00282

• Wide power supply range single supply—3VDC to 30VDC or dual • Very low supply current drain (400µA)—essentially independent of • Low input biasing current—45nADC temperature-compensated • Low input offset voltage—2mVDC and offset current—5nADC • Differential input volt...



LM358
Philips Semiconductors
Low power dual operational amplifiers
Product specification
NE/SA/SE532/
LM158/258/358/A/2904
DESCRIPTION
The 532/358/LM2904 consists of two independent, high gain,
internally frequency-compensated operational amplifiers internally
frequency-compensated operational amplifiers designed specifically
to operate from a single power supply over a wide range of voltages.
Operation from dual power supplies is also possible, and the low
power supply current drain is independent of the magnitude of the
power supply voltage.
UNIQUE FEATURES
In the linear mode the input common-mode voltage range includes
ground and the output voltage can also swing to includes ground
and the output voltage can also swing to ground, even though
operated from only a single power supply voltage. The unity gain
cross frequency is temperature-compensated. The input bias current
is also temperature-compensated.
FEATURES
Internally frequency-compensated for unity gain
Large DC voltage gain—100dB
Wide bandwidth (unity gain)—1MHz (temperature-compensated)
PIN CONFIGURATIONS
D, FE, N Packages
OUTPUT A 1
8 V+
INVERTING INPUT A 2
NON INVERTING INPUT A 3
A B 7 OUTPUT B
–+ +–
6 INVERTING INPUT B
V– 4
5 NON INVERTING INPUT B
Figure 1. Pin Configuration
SL00282
Wide power supply range single supply—3VDC to 30VDC or dual
supplies—±1.5VDC to ±15VDC
Very low supply current drain (400µA)—essentially independent of
supply voltage (1mW/op amp at +5VDC)
Low input biasing current—45nADC temperature-compensated
Low input offset voltage—2mVDC and offset current—5nADC
Differential input voltage range equal to the power supply voltage
Large output voltage—0VDC to V+ 1.5VDC swing
EQUIVALENT CIRCUIT
v+
6µA
100µA
6µA
CC
Q5
Q6
Q7
Q2 Q3
Q1 Q4
INPUTS
+
Q8 Q9
RSC
OUTPUT
Q11
Q10 Q12
Q13
50µA
Figure 2. Equivalent Circuit
SL00283
1995 Nov 27
1 853-1241 16050

LM358
Philips Semiconductors
Low power dual operational amplifiers
Product specification
NE/SA/SE532/
LM158/258/358/A/2904
ORDERING INFORMATION
DESCRIPTION
8-Pin Plastic Small Outline (SO) Package
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline (SO) Package
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Plastic Small Outline (SO) Package
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline (SO) Package
8-Pin Plastic Small Outline (SO) Package
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Small Outline (SO) Package
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Ceramic Dual In-Line Package (CERDIP)
ABSOLUTE MAXIMUM RATINGS
SYMBOL
PARAMETER
VS Supply voltage, V+
Differential input voltage
VIN Input voltage
Maximum power dissipation
TA=25°C (Still air)1
PD FE package
N package
D package
Output short-circuit to GND5
V+<15 VDC and TA=25°C
Operating ambient temperature range
NE532/LM358/LM358A
TA LM258
LM2904
SA532
SE532/LM158
TSTG
Storage temperature range
TSOLD
Lead soldering temperature (10sec max)
NOTES:
1. Derate above 25°C, at the following rates:
FE package at 6.2mW/°C
N package at 9.3mW/°C
D package at 6.2mW/°C
TEMPERATURE RANGE
0 to +70°C
0 to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +125°C
-40°C to +125°C
-55°C to +125°C
-25°C to +125°C
-25°C to +125°C
0 to +70°C
0 to +70°C
0 to +70°C
0 to +70°C
-55°C to +125°C
-55°C to +125°C
ORDER CODE
NE532D
NE532N
SA532D
SA532N
SA532FE
LM2904D
LM2904N
LM158FE
LM258N
LM258D
LM358D
LM358N
LM358AN
LM358AD
SE532N
SE532FE
DWG #
SOT96-1
SOT97-1
SOT96-1
SOT97-1
0580A
SOT96-1
SOT97-1
0580A
SOT97-1
SOT96-1
SOT96-1
SOT97-1
SOT97-1
SOT96-1
SOT97-1
0580A
RATING
32 or ±16
32
-0.3 to +32
780
1160
780
Continuous
0 to +70
-25 to +85
-40 to +125
-40 to +85
-55 to +125
-65 to +150
300
UNIT
VDC
VDC
VDC
mW
mW
mW
°C
°C
°C
°C
°C
°C
°C
1995 Nov 27
2




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)