DatasheetsPDF.com

DN8798MS Dataheets PDF



Part Number DN8798MS
Manufacturers Panasonic
Logo Panasonic
Description 3 V operation Hall IC
Datasheet DN8798MS DatasheetDN8798MS Datasheet (PDF)

Hall ICs DN8798MS 3 V operation Hall IC s Overview The DN8798MS is a 3 V operation Hall IC which includes a Hall element, amplifier circuit, Schmidt circuit, stabilized power supply and temperature compensation circuit which are integrated on a single chip with a fine patterning technology. The magnetic input signal is outputted by being converted to high or low. We have improved the conventional circuit to realize a stable operation covering from low to high supply voltage and from low to high.

  DN8798MS   DN8798MS


Document
Hall ICs DN8798MS 3 V operation Hall IC s Overview The DN8798MS is a 3 V operation Hall IC which includes a Hall element, amplifier circuit, Schmidt circuit, stabilized power supply and temperature compensation circuit which are integrated on a single chip with a fine patterning technology. The magnetic input signal is outputted by being converted to high or low. We have improved the conventional circuit to realize a stable operation covering from low to high supply voltage and from low to high temperature. 10° + 0.20 0 to 0.1 1.10 – 0.10 0.30 1.10 + – 0.10 Unit: mm 1.45 0.10 0.40 + – 0.05 0.65 ± 0.15 0.10 0.16 + – 0.06 3 0.25 1.50 + – 0.05 0.20 2.80 + – 0.30 1 0.95 2 0.65 ± 0.15 0.95 1.90 ± 0.20 + 0.20 2.90 – 0.05 s Features • Wide operating supply voltage range (VCC = 2.7 V to 14.4 V) • Wide operating ambient temperature (−40°C to +85°C) • Package: Mini type (3-pin type) (1.1 mm thick: Same as a standard transistor) MINI-3D s Applications • DC brushless motor, fan motor, rotation sensor, detection of cover open/close (example for a cellular phone), position sensor s Block Diagram VCC Constant voltage source 2 5° Comparator Hall element Amplifier 1 Out GND 3 0.40 ± 0.20 1 DN8798MS s Pin Descriptions Pin No. 1 2 3 Symbol Out VCC GND Description Output pin Supply voltage pin Ground pin Hall ICs s Absolute Maximum Ratings Parameter Supply voltage Symbol VCC VOUT Supply current Power dissipation Operating ambient temperature Storage temperature ICC PD Topr Tstg Rating 18 18  120 −40 to +85 −55 to +125 mA mW °C °C Unit V Note) 1. Except for the operating ambient temperature and storage temperature, all ratings are for Ta = 25°C. 2. The reverse insertion of this IC will cause its breakdown. 3. It will operate normally in several tens of ms after power on. 4. This IC is designed for a general use and if you want to use for an automotive use, please consult our staff of the nearby sales office beforehand. s Recommended Operating Range Parameter Supply voltage Symbol VCC Range 2.7 to 14.4 Unit V s Electrical Characteristics at Ta = 25°C Parameter Operating magnetic flux density 1 Operating magnetic flux density 2 Hysteresis width Output voltage 1 Output voltage 2 Output current Supply current 1 Supply current 2 Symbol BH-L BL-H BW VOL1 VOL2 IOH ICC1 ICC2 VCC = 3 V VCC = 3 V VCC = 3 V VCC = 14.4 V, IO = 5 mA, B = −15 mT VCC = 2.7 V, IO = 5 mA, B = −15 mT VCC = 2.7 V to 14.4 V VO = 14.4 V, B = 15 mT VCC = 14.4 V, B = 15 mT VCC = 2.7 V, B = 15 mT Conditions Min −15  4    1.0 1.0 Typ   8 0.07 0.07  3.4 2.5 Max  15 12 0.30 0.30 10 6.0 6.0 Unit mT mT mT V V µA mA mA Note) 1. Symbol BH-L stands for the operating magnetic flux density where its output level varies from high to low. 2. Symbol BL-H stands for the operating magnetic flux density where its output level varies from low to high. 3. The variation of operating magnetic flux density does not depend on supply voltage due to its built-in stabilized power source. (VCC should be confined to the range of 2.7 V to 14.4 V.) 4. A supply current changes by maximum 1 mA when its output level varies from high to low. 2 Hall ICs s Caution on use of Hall ICs DN8798MS As the Hall IC is often used to detect movement, the position of a Hall IC may be changed, and there is the risk of a change in detection level, if exposed to shock or vibration over a long period of time. Secure the IC by applying adhesive to the package or placing in a dedicated case. 1. On mounting of the surface mount type (MINI-3D package) When mounted on the printed circuit board, the Hall IC may be highly stressed by the warping that may occur from soldering. This may also cause a change in the operating flux density characteristic and a deterioration of its resistance to moisture. 2. On using flux in soldering Choose a flux which does not include ingredients from halogen group, such as chlorine, fluorine, etc. The ingredients of halogen group may enter where the lead frame and package resin joint, causing corrosion and the disconnection of the aluminum wiring on the surface of an IC chip. 3. On fixing a Hall IC with the holder When a Hall IC is mounted on the printed circuit board with a holder and the coefficient of expansion of the holder is large, the lead wire of the Hall IC will be stretched and it may give a stress to the Hall IC. If the lead wire is stressed intensely due to the distortion of holder or board, the adhesives between the package and the lead wire may be weakened and cause a minute gap resulting in the deterioration of its resistance to moisture. Sensitivity may also be changed by this stress. 4. Power supply line/power transmission line If a power supply line/power transmission line becomes longer, noise and/or oscillation may be found on the line. In this case, set the capacitor of 0.1 µF to 10 µF near a Hall IC to prevent it. If a voltage of 18 V or more is thought to be applied to the power supply line (flyback voltage from coil or the ignit.


DN8799MS DN8798MS DN8695


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)