TOSHIBA Bipolar linear Integrated Circuit Silicon Monolithic
TA8214K
Multi Output Voltage Regulator (8.3V output)
The T...
TOSHIBA Bipolar linear Integrated Circuit Silicon Monolithic
TA8214K
Multi Output Voltage
Regulator (8.3V output)
The TA8214K is voltage
regulator IC, designed for car audio use, has built−in 4 outputs. (fixed 1 output and changed 3 outputs.) The input−output differential voltage : VDIF is very small. (VDIF = 0.3V (typ.)) Because each outputs consist of
PNP transistor. In addition, protection of over voltage, output short and thermal shut down are involved.
Features
· 4 channel outputs OUT1 : 8.3V (typ.) / 100mA (max.) .... fixed output OUT2 : 8.3V (typ.) / 100mA (max.) OUT3 : 8.3V (typ.) / 300mA (max.) switchable output OUT4 : 8.3V (typ.) / 100mA (max.)
· Very small input−output differential voltage VDIF = 0.3V (typ.)
· Built−in various protection circuits Over voltage, Output short, Thermal shut down
· Input operating voltage VIN (opr) = 9.3~18V
Weight: 2.19g (typ.)
TA8214K
1 2002-10-30
Block Diagram
TA8214K
2 2002-10-30
TA8214K
Caution For Use And Method Of Application
(1) IC protective diode in VIN < VOUT mode : D
When surge voltage is applied to the input / output terminals of IC or VOUT becomes larger than VIN (VIN < VOUT) at the time of power on / off, insert a high speed switching diode : D.
(2) Power limiting register : RSD
If VIN is too high, insert a power limiting register : RSD to reduce power dissipation of IC.
(3) Input surge protective zener diode : ZD
Though an over voltage protective circuit (for positive surge) is built in, if excessive surge is inp...