MC14528B
Dual Monostable Multivibrator
The MC14528B is a dual, retriggerable, resettable monostable multivibrator. It m...
MC14528B
Dual Monostable Multivibrator
The MC14528B is a dual, retriggerable, resettable monostable multivibrator. It may be triggered from either edge of an input pulse, and produces an output pulse over a wide range of widths, the duration of which is determined by the external timing components, CX and RX.
Features
Separate Reset Available Diode Protection on All Inputs Triggerable from Leading or Trailing Edge Pulse Supply Voltage Range = 3.0 Vdc to 18 Vdc Capable of Driving Two Low−power TTL Loads or One Low−power
Schottky TTL Load Over the Rated Temperature Range
This part should only be used in new designs where the pulse width
is < 10 ms Note: For designs requiring a pulse width > 10 ms, please see MC14538, which is pin−for−pin compatible
NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
This Device is Pb−Free and is RoHS Compliant
MAXIMUM RATINGS (Voltages Referenced to VSS)
Rating
Symbol
Value
Unit
DC Supply Voltage Range
Input or Output Voltage Range (DC or Transient)
VDD Vin, Vout
−0.5 to +18.0 −0.5 to VDD + 0.5
V V
Input or Output Current (DC or Transient) per Pin
Iin, Iout
± 10 mA
Power Dissipation, per Package (Note 1)
PD
500 mW
Ambient Temperature Range
TA
−55 to +125
°C
Storage Temperature Range
Lead Temperature (8−Second Soldering)
Tstg
−65 to +150
°C
TL 260 °C
Stresses exceeding those listed in the Maximum Ratings table may dam...