30W BTL x 2CH AUDIO POWER AMPLIFIER
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA8233BH
30W BTL × 2ch Audio Power Amplifier
TA8233BH
The...
Description
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic
TA8233BH
30W BTL × 2ch Audio Power Amplifier
TA8233BH
The thermal resistance θj−T of TA8233BH package designed for low thermal resistance, has high efficiency of heat radiation. The temperature rise of chip can be reduced, and the influence from the degradation of the features due to the temperature rise at the high output can also be reduced. This stereo audio power IC, designed for car audio use, has two built−in channels to reduce the characteristic difference between L and R channels. It also contains output short detection circuit, output clip detection and various kind of protection.
Features
· High power
Weight: 9.8g (typ.)
: POUT (1) = 30W (typ.) / channel (VCC = 14.4V, f = 1kHz, THD = 10%, RL = 2Ω) POUT (2) = 26W (typ.) / channel (VCC = 13.2V, f = 1kHz, THD = 10%, RL = 2Ω) POUT (3) = 19W (typ.) / channel (VCC = 13.2V, f = 1kHz, THD = 10%, RL = 4Ω)
· Low thermal resistance: θj−T = 1.5°C / W (infinite heat sink)
· Low distortion ratio: THD = 0.04% (typ.) (VCC = 13.2V, f = 1kHz, POUT = 1W, RL = 4Ω, GV = 50dB)
· Low noise: VNO = 0.30mVrms (typ.) (VCC = 13.2V, RL = 4Ω, GV = 50dB, Rg = 0Ω, BW = 20Hz~20kHz)
· Built−in stand−by function : (with pin(4) set at low, power is turned off.) ISB = 1µA (typ.)
· Built−in output clip detection circuit : (pin(1): Open collector (active low))
· Built−in output short detection circuit : (pin(9): Open collector (active low))
· Built−in various protection circuits : ...
Similar Datasheet