PROFESSIONAL TYPE MINIATURE STYLE
INTRODUCTION
The MFO Series are manufactured by high vacuum sputtering deposit metal f...
PROFESSIONAL TYPE MINIATURE STYLE
INTRODUCTION
The MFO Series are manufactured by high vacuum sputtering deposit metal film on high thermal conductivity and specific gravity ROSENTHAL ceramic or same grade rods. The resistors are coated with multilayers of blue coloured laquer.
FEATURES
44061, 45921 part 107 40101-039, 40101-107 10509F (Char. D & C )
DIN CECC MIL
Resistance Tolerance: ±1% T.C.R ±50ppm/oC
Derating Curve:
Hot-Spot Temperature:
Measuring Position 200
100 80 60 40 20
70°C
150
100
50 150 20 40 60 80 100 120 140 160 180 0 25 50 75
MF0207 MF0204 100
Dimensions:
od UNIT :MM OD
Style
Normal
Dimensions
L OD H od
L
MF0204 MF0207
H
3.3 ±0.4 6.3±0.5
1.8±0.3 2.3±0.3
28±2.0 28±2.0
0.5±0.05 0.6±0.05
series MFO
[email protected] :: tel: +44 (0) 1494 738 600
TECHNICAL SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
* Standard Resistance is 10Ω∼1ΜΩ, below or over this resistance on request.
STYLE
Power Rating @ 70% Operation Temperature Range Maximum Working Voltage Maximum Overload Voltage Dielectric Withstanding Voltage Value Range ±1% Temperature Coefficient
MF0204
0.4W -55oC to +55oC 200V 400V 300V 10Ω ~ 1MΩ ±50ppm/oC
MF0207
0.6W
300V 600V 500V
ENVIRONMENTAL CHARACTERISTICS
* Rated continuous working voltage (RCWV) = √ Power Rating x Resistance Value
Performance Test
Short Time Overload Dielectric Withstand Voltage Temp. Coefficient of Resistance Insulation Resistance Solderability Resistance to Solvent Terminal Strength Pulse Overload Load Li...