MC33102

Order this document by MC33102/D Sleep-Mode™ Two-State, Micropower Operational Amplifier The MC33102 dual operational amplifier is an innovative design concept employing Sleep–Mode technology. Sleep–Mode amplifiers have two separate states, a sleepmode and an awakemode. In sleepmode, the amplifier is active and waiting for an input signal. When a signal is applied causing the amplifier to source or sink 160 µA (typically) to the load, it will automatically switch to the awakemode which offers higher slew rate, gain bandwidth, and drive capability. Two States: “Sleepmode” (Micropower) and “Awakemode” (High Performance) Switches from Sleepmode to Awakemode in 4.0 µs when Output Current Exceeds the Threshold Current (RL = 600 Ω) Independent Sleepmode Function for Each Op Amp MC33102 DUAL SLEEP–MODE OPERATIONAL AMPLIFIER SEMICONDUCTOR TECHNICAL DATA Standard Pinouts – No Additional Pins or Components Required Sleepmode State – Can Be Used in the Low Current Idle State as a Fully Functional Micropower Amplifier Automatic Return to Sleepmode when Output Current Drops Below Threshold No Deadband/Crossover Distortion; as Low as 1.0 Hz in the Awakemode Drop–in Replacement for Many Other Dual Op Amps ESD Clamps on Inputs Increase Reliability without Affecting Device Operation D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8) 8 1 P SUFFIX PLASTIC PACKAGE CASE 626 8 1 Sleep–Mode is a trademark of Motorola, Inc. TYPICAL SLEEPMODE/AWAKEMODE PERFORMANCE Characteristic Lo...