AUTOMOTIVE DIRECTION INDICATOR
Order this document by MC33193/D
MC33193
Advance Information Automotive Direction Indicator
The MC33193 is a new gener...
Description
Order this document by MC33193/D
MC33193
Advance Information Automotive Direction Indicator
The MC33193 is a new generation industry standard UAA1041 “Flasher”. It has been developed for enhanced EMI sensitivity, system reliability, and improved wiring simplification. The MC33193 is pin compatible with the UAA1041 and UAA1041B in the standard application configuration as shown in Figure 9, without lamp short circuit detection and using a 20 mΩ shunt resistor. The MC33193 has a standby mode of operation requiring very low standby supply current and can be directly connected to the vehicle’s battery. It includes an RF filter on the Fault detection pin (Pin 7) for EMI purposes. Fault detection thresholds are reduced relative to those of the UAA1041, allowing a lower shunt resistance value (20 mΩ) to be used. Pin Compatible with the UAA1041
AUTOMOTIVE DIRECTION INDICATOR
SEMICONDUCTOR TECHNICAL DATA
8 1
Defective Lamp Detection Threshold RF Filter for EMI Purposes Load Dump Protection Double Battery Capability for Jump Start Protection Internal Free Wheeling Diode Protection Low Standby Current Mode
D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8)
8 1
P SUFFIX PLASTIC PACKAGE CASE 626
Simplified Block Diagram PIN CONNECTIONS
1
SW2 SW1 Starter 8
VSS 1 VCC 2 Relay 3 Oscillator 4
5 Oscillator 6 Enable 7 Fault Detector 8 Starter (Top View)
2
24 V 33 V Detector
Reference Voltage
RF Filter
7
3
Relay Driver
Lamp Fault Detector
6
4 Oscillator
5
ORDERING IN...
Similar Datasheet