MIH Series / 5mm x 7mm Ceramic SMD
MIH Series
5mm X 7mm Ceramic SMD
• Ceramic SMD Package • 5.0, 3.3, 2.5, and 1.8 Volt • HCMOS/TTL Compatible Output • St...
Description
MIH Series
5mm X 7mm Ceramic SMD
Ceramic SMD Package 5.0, 3.3, 2.5, and 1.8 Volt HCMOS/TTL Compatible Output Stability to ±10ppm Tape and Reel Packaging
Electrical Specifications
Frequency Range 5V and 3.3V 2.5V 1.8V Frequency Stability (Inclusive of Temperature, Load, Voltage and Aging) Operating Temperature Range Storage Temperature Range Supply Voltage (Vdd) ±5% Supply Current Vdd = 5V Vdd = 3.3V Vdd = 2.5V Vdd = 1.8V Output Voltage HCMOS Logic 0 Logic 1 Duty Cycle 50% of waveform Load Drive Capability 5V(less than 50MHz) 5V(greater than 50MHz) 3.3V(less than 50MHz) 3.3V(greater than 50MHz) 2.5V 1.8V Rise / Fall Time Start Up Time Jitter RMS *Please contact your MMD representative for up-to-date typical jitter information 1.500MHz to 156.250MHz 1.500MHz to 70.000MHz 1.544MHz to 40.000MHz ±100ppm to ±10ppm 0°C - 70°C to -40°C - 85°C -55°C - 125°C 5.0Vdc, 3.3Vdc, 2.5Vdc, or 1.8Vdc 70mA max. 40mA max. 35mA max. 15mA max. 10% Vdd max. 90% Vdd min. 40%/60% max. or 45%/55% max. 10 TTL Gates or 50pF 10 TTL Gates or 15pF 10 TTL Gates or 30pF 10 TTL Gates or 15pF 10 TTL Gates or 15pF 10 TTL Gates or 15pF 4nSec max. 10mSec max. 10pSec max.*
www.mmdcomp.com phone: 949-709-5075 / fax: 949-709-3536
Specifications subject to change without notice
OS11
Revision: 4/20/04 I
Part Numbering Guide MI
5X7 Ceramic SMD
H
Frequency Stability 100 = ±100ppm 050 = ±50ppm 025 = ±25ppm 020 = ±20ppm 015 = ±15ppm 010 = ±10ppm** Operating Temperature Blank = 0°C to 70°C 27 = -20°C to 70°...
Similar Datasheet