MC74HC4511

MOTOROLA SEMICONDUCTOR TECHNICAL DATA BCD-to-Seven-Segment Latch/ Decoder/Display Driver High–Performance Silicon–Gate CMOS The MC74HC4511 is identical in pinout to the MC14511 metal–gate CMOS decoder/driver. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. The HC4511 provides the functions of a 4–bit storage latch, a BCD–to– seven–segment decoder, and a display driver. It can be used either directly or indirectly with seven–segment light–emitting diode (LED), incandescent, fluorescent, gas discharge, or liquid–crystal readouts. Lamp test (LT), blanking (BI), and latch enable (LE) inputs are used to test the display, to turn off or pulse modulate the brightness of the display, and to store a BCD code, respectively. Latch Storage of BCD Inputs Blanking Input Lamp Test Input Output Drive Capability: 10 LSTTL Loads Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 2 to 6 V Low Input Current: 1 µA High Noise Immunity Characteristic of CMOS Devices In Compliance with the Requirements Defined by JEDEC Standard No. 7A Chip Complexity: 264 FETs or 66 Equivalent Gates 16 MC74HC4511 N SUFFIX PLASTIC PACKAGE CASE 648–08 1 16 1 D SUFFIX SOIC PACKAGE CASE 751B–05 ORDERING INFORMATION MC74HCXXXXN MC74HCXXXXD Plastic SOIC PIN ASSIGNMENT B C LT BI LE D A GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC f g a b c d e LOGIC DIAGRAM A (LSB) BCD INPUTS B C D (MSB) 7 1 2 6...