CTCSS Encoder
DATA BULLETIN
MX315A
Features
Field Programmable Tone Encoder 40 CTCSS Frequencies Crystal-Controlled Frequency S...
Description
DATA BULLETIN
MX315A
Features
Field Programmable Tone Encoder 40 CTCSS Frequencies Crystal-Controlled Frequency Stability Low Distortion Sinewave Output Few External Components Required CMOS Low Power Requirements
CTCSS Encoder
Applications
Mobile Radio Base Stations & Repeater Stations Mobile Radios Hand-Held Radios Industrial Controls Intercom Systems Door-Entry Systems
Xtal/Clock
Clock Generator
Xtal D0-D5
Binary Rate Multiplier Programmed Clocks TX Tone Sinewave Output Emitter Follower
VDD TX Enable
TX Tone Square Wave
TX Tone Output
Enable
TX Enable
The MX315A is a monolithic CMOS tone encoder for sub-audible tone squelch systems, which provides three additional frequencies over the earlier MX315A. These frequencies are 69.3, 97.4 and 206.5Hz. The tone frequencies are derived from an input reference frequency. An on-chip inverter is provided to drive an external crystal circuit. Tone selection is achieved through six programming inputs and two control inputs (which allow either a logic “1” or “0” to enable the device). A low distortion sinewave is generated at the TX Tone Output when the MX315A is enabled. The emitter follower output stage can source 1mW directly into a 600 load (0dBm). The MX315A is available in the following package styles: 16-pin SOIC (MX315ADW), 14-pin PDIP (MX315AP) and 14-pin CDIP (MX315AJ).
1998 MXCOM, INC.
www.mxcom.com
tel: 800 638 5577 336 744 5050 fax: 336 744 5054
Doc. # 20480054.006
4800 Bethania ...
Similar Datasheet