MC74HCT374A

MC74HCT374A Octal 3-State Noninverting D Flip-Flop with LSTTL-Compatible Inputs High−Performance Silicon−Gate CMOS The MC74HCT374A may be used as a level converter for interfacing TTL or NMOS outputs to High−Speed CMOS inputs. The HCT374A is identical in pinout to the LS374. Data meeting the setup and hold time is clocked to the outputs with the rising edge of Clock. The Output Enable does not affect the state of the flip−flops, but when Output Enable is high, the outputs are forced to the high−impedance state. Thus, data may be stored even when the outputs are not enabled. The HCT374A is identical in function to the HCT574A, which has the input pins on the opposite side of the package from the output pins. This device is similar in function to the HCT534A, which has inverting outputs. Features Output Drive Capability: 15 LSTTL Loads TTL/NMOS−Compatible Input Levels Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 4.5 to 5.5 V Low Input Current: 1.0 mA In Compliance With the JEDEC Standard No. 7.0 A Requirements Chip Complexity: 276 FETs or 69 Equivalent Gates Improvements over HCT374 ♦ Improved Propagation Delays ♦ 50% Lower Quiescent Power ♦ Improved Input Noise and Latchup Immunity These Devices are Pb−Free and are RoHS Compliant LOGIC DIAGRAM DATA INPUTS D0 3 D1 4 D2 7 D3 8 D4 13 D5 14 D6 17 D7 18 CLOCK 11 2 Q0 5 Q1 6 Q2 9 Q3 12 Q4 15 Q5 16 Q6 19 Q7 NONINVERTING OUTPUTS OUTPUT ENABLE 1 PIN 20 = VCC PIN 10 = GND © Semi...