Precision Voltage Reference
SPX1004
1.2V / 2.5V Micropower Voltage Reference
FEATURES
■ Initial Voltage Tolerance: SPX1004-1.2 = ±10mV SPX1004-2.5...
Description
SPX1004
1.2V / 2.5V Micropower Voltage Reference
FEATURES
■ Initial Voltage Tolerance: SPX1004-1.2 = ±10mV SPX1004-2.5 = ±20mV
■ Low Dynamic Impedance 0.6 Ω Max.
■ Low Operating Current: SPX1004-1.2 = ±10µA SPX1004-2.5 ±20µA
■ Wide Operating Current Range 0.6 Ω Max.
■ Direct Replacement for LT1004, LM1004 and AS1004
■ Lead Free, RoHS Compliant
Packages
N/C 1 N/C 2 N/C 3 ANODE 4
SPX1004 8 Pin NSOIC
8 CATHODE 7 N/C 6 CATHODE 5 ANODE
APPLICATIONS ■ A/D and D/A Reference ■ Reference for 5V Systems ■ Digital Voltmeter ■ Power Supply Monitor
DESCRIPTION
The SPX1004 is a 2-terminal bandgap precision voltage reference that provides a stable fixed output voltage of 1.2V and 2.5V with a tolerance of ±10mV for SPX1004-1.2 and ±20mV for SPX1004-2.5. Design, process and precision on chip trimming yield a very low temperature coefficient of 25 ppm/°C.
The SPX1004 can be used as a pin-to-pin replacement for the LT1004, LM1004 or AS1004. The SPX1004 is available in SOT-89, NSOIC-8 and TO-92 packages over the operating temperature range of 0°C to 70°C.
BLOCK DIAGRAMS
Cathode (K)
Cathode (K)
+ 1.235V
500k 500k
+ 1.250V
Anode (A) Figure 1a. SPX1004-1.2 Block Diagram
Anode (A) Figure 1b. SPX1004-2.5 Block Diagram
Date: 05/17/07
SPX1004 1.2V/2.5V Micropower Voltage Reference
1
© Copyright 2007 Sipex Corporation
ABSOLUTE MAXIMUM RATINGS
Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and func...
Similar Datasheet