1300

CRYSTAL CLOCK OSCILLATORS WARRANTY CLAUSE s 1300 Series No. 1 2 3 4 5 6 7 8 9 Item Vibration Test Shock Test Drop Test Humidity Test Solder Heat Test Thermal Shock Test Terminal Strength Test Soldering Test Solvent Resistance MIL-STD-202F, TM204D, condition B MIL-STD-202F, TM213B, condition 9,800m/s2 0.5 ms 3 times natural drops on to hard wooden board from the height (see 4 ) MIL-STD-202F, TM103B, condition A MIL-STD-202F, TM210A, condition B (260°C ± 5°C for 10 ± 1 seconds) Expose to 100 cycles of extreme temperatures, that is, –40°C for 30 minutes then +85°C for 30 minutes. MIL-STD-202F, TM211A, condition A (Pull Weighting 0.907 kg) and condition C (Bend Weighting 0.45 kg) Soaking in the soldering bath at +235±5°C for 5±1 seconds More than 90% of lead should be covered by solder. After soaking in alcohol for 30 minutes. The markings are not faded out. F/F < = ±10×10-6 Condition Specification Please see below note. (*) Please see below note. (*) Please see below note. (*) Please see below note. (*) Please see below note. (*) Please see below note. (*) (*) After the tests mentioned above, the electrical specifications are satisfied. Also frequency deviation before and after test should be The electrical specifications are frequency tolerance, Lcc, Tr/Tf, VOL/VOH, duty cycle. Model 1300 Height 50 cm s 1600 Series No. 1. 2. Item P.C Test Thermal Shock Test Heat Cycle Test High Temperature High Humidity Test +85°C Aging (non operated) Vibration Test Shock Test Condition Tempe...