DatasheetsPDF.com

MC33274A Dataheets PDF



Part Number MC33274A
Manufacturers Motorola
Logo Motorola
Description HIGH PERFORMANCE OPERATIONAL AMPLIFIERS
Datasheet MC33274A DatasheetMC33274A Datasheet (PDF)

Order this document by MC33272A/D MC33272A MC33274A Single Supply, High Slew Rate Low Input Offset Voltage, Bipolar Operational Amplifiers The MC33272/74 series of monolithic operational amplifiers are quality fabricated with innovative Bipolar design concepts. This dual and quad operational amplifier series incorporates Bipolar inputs along with a patented Zip–R–Trim element for input offset voltage reduction. The MC33272/74 series of operational amplifiers exhibits low input offset voltage a.

  MC33274A   MC33274A



Document
Order this document by MC33272A/D MC33272A MC33274A Single Supply, High Slew Rate Low Input Offset Voltage, Bipolar Operational Amplifiers The MC33272/74 series of monolithic operational amplifiers are quality fabricated with innovative Bipolar design concepts. This dual and quad operational amplifier series incorporates Bipolar inputs along with a patented Zip–R–Trim element for input offset voltage reduction. The MC33272/74 series of operational amplifiers exhibits low input offset voltage and high gain bandwidth product. Dual–doublet frequency compensation is used to increase the slew rate while maintaining low input noise characteristics. Its all NPN output stage exhibits no deadband crossover distortion, large output voltage swing, and an excellent phase and gain margin. It also provides a low open loop high frequency output impedance with symmetrical source and sink AC frequency performance. The MC33272/74 series is specified over –40° to +85°C and are available in plastic DIP and SOIC surface mount packages. • Input Offset Voltage Trimmed to 100 µV (Typ) HIGH PERFORMANCE OPERATIONAL AMPLIFIERS SEMICONDUCTOR TECHNICAL DATA DUAL 8 1 8 1 P SUFFIX PLASTIC PACKAGE CASE 626 D SUFFIX PLASTIC PACKAGE CASE 751 (SO–8) • • • • • • • • • • • • • • Low Input Bias Current: 300 nA Low Input Offset Current: 3.0 nA High Input Resistance: 16 MΩ Low Noise: 18 nV/ √ Hz @ 1.0 kHz High Gain Bandwidth Product: 24 MHz @ 100 kHz High Slew Rate: 10 V/µs Power Bandwidth: 160 kHz Excellent Frequency Stability Unity Gain Stable: w/Capacitance Loads to 500 pF Large Output Voltage Swing: +14.1 V/ –14.6 V Low Total Harmonic Distortion: 0.003% Power Supply Drain Current: 2.15 mA per Amplifier Single or Split Supply Operation: +3.0 V to +36 V or ±1.5 V to ±18 V ESD Diodes Provide Added Protection to the Inputs 14 1 14 1 PIN CONNECTIONS Output 1 Inputs 1 VEE 1 2 3 4 – + – + 8 7 6 5 VCC Output 2 Inputs 2 (Top View) QUAD ORDERING INFORMATION Op Amp Function Dual Device MC33272AD MC33272AP Quad MC33274AD MC33274AP 40° to +85 85°C TA = –40 Operating Temperature Range Package SO–8 Plastic DIP SO–14 Plastic DIP P SUFFIX PLASTIC PACKAGE CASE 646 D SUFFIX PLASTIC PACKAGE CASE 751A (SO–14) PIN CONNECTIONS Output 1 Inputs 1 3 1 2 – + – + 14 13 Output 4 Inputs 4 1 4 12 11 VCC Inputs 2 4 5 6 + – + – VEE Inputs 3 Output 3 10 9 8 2 3 Output 2 7 (Top View) © Motorola, Inc. 1996 Rev 0 MOTOROLA ANALOG IC DEVICE DATA 1 MC33272A MC33274A MAXIMUM RATINGS Rating Supply Voltage Input Differential Voltage Range Input Voltage Range Output Short Circuit Duration (Note 2) Maximum Junction Temperature Storage Temperature Maximum Power Dissipation Symbol VCC to VEE VIDR VIR tSC TJ Tstg PD Value +36 (Note 1) (Note 1) Indefinite +150 –60 to +150 (Note 2) Unit V V V sec °C °C mW NOTES: 1. Either or both input voltages should not exceed VCC or VEE. 2. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded (see Figure 2). DC ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = –15 V, TA = 25°C, unless otherwise noted.) Characteristics Input Offset Voltage (RS = 10 Ω, VCM = 0 V, VO = 0 V) (VCC = +15 V, VEE = –15 V) TA = +25°C TA = –40° to +85°C (VCC = 5.0 V, VEE = 0) TA = +25°C Average Temperature Coefficient of Input Offset Voltage RS = 10 Ω, VCM = 0 V, VO = 0 V, TA = –40° to +85°C Input Bias Current (VCM = 0 V, VO = 0 V) TA = +25°C TA = –40° to +85°C Input Offset Current (VCM = 0 V, VO = 0 V) TA = +25°C TA = –40° to +85°C Common Mode Input Voltage Range (∆VIO = 5.0 mV, VO = 0 V) TA = +25°C Large Signal Voltage Gain (VO = 0 V to 10 V, RL = 2.0 kΩ) TA = +25°C TA = –40° to +85°C Output Voltage Swing (VID = ±1.0 V) (VCC = +15 V, VEE = –15 V) RL = 2.0 kΩ RL = 2.0 kΩ RL = 10 kΩ RL = 10 kΩ (VCC = 5.0 V, VEE = 0 V) RL = 2.0 kΩ RL = 2.0 kΩ Common Mode Rejection (Vin = +13.2 V to –15 V) Power Supply Rejection VCC/VEE = +15 V/ –15 V, +5.0 V/ –15 V, +15 V/ –5.0 V Output Short Circuit Current (VID = 1.0 V, Output to Ground) Source Sink Power Supply Current Per Amplifier (VO = 0 V) (VCC = +15 V, VEE = –15 V) TA = +25°C TA = –40° to +85°C (VCC = 5.0 V, VEE = 0 V) TA = +25°C 6 7 Figure 3 Symbol |VIO| — — — 3 4, 5 ∆VIO/∆T — IIB — — |IIO| — — VICR VEE to (VCC –1.8) AVOL 90 86 8, 9, 12 VO + VO – VO + VO – 10, 11 VOL VOH 13 14, 15 16 CMR PSR 80 ISC +25 –25 17 ICC — — — 2.15 — — 2.75 3.0 2.75 +37 –37 — — mA 105 — mA — 3.7 80 — — 100 0.2 5.0 — dB dB 13.4 — 13.4 — 13.9 –13.9 14 –14.7 — –13.5 — –14.1 100 — — — V dB 3.0 — 65 80 V 300 — 650 800 nA 2.0 — nA 0.1 — — 1.0 1.8 2.0 µV/°C Min Typ Max Unit mV 2 MOTOROLA ANALOG IC DEVICE DATA MC33272A MC33274A AC ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = –15 V, TA = 25°C, unless otherwise noted.) Characteristics Slew Rate (Vin = –10 V to +10 V, RL = 2.0 kΩ, CL = 100 pF, AV = +1.0 V) Gain Bandwidth Product (f = 100 kHz) AC Voltage Gain (RL = 2.0 kΩ, VO = 0 V, f = 20 kHz) Unity Gain Frequency (Open Loop) Gain Margin (RL = 2.0 kΩ, CL = 0 pF) Phase Margin (RL = 2.0 kΩ, CL = 0.


MC33272A MC33274A M602


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)